Fiat 2013 500 Owner's Manual page 191

By pressing the or
change progressively. By pressing them down longer,
the levels will change quickly.
Select the value "0" to set the right and left audio outputs
at the same level.
Fader Adjustment
Proceed as follows:
1. Press AUDIO button.
2. Press the or button to set "Fader" in the
AUDIO menu.
3. Press the button to increase the sound coming
from the rear speakers or the
the sound coming from the front speakers.
By pressing the or
change progressively. By pressing them down longer,
the levels will change quickly.
buttons briefly, the levels will
button to increase
buttons briefly, the levels will
UNDERSTANDING YOUR INSTRUMENT PANEL 189
Select the value "0" to set the right and left audio outputs
at the same level.
Loudness Function — If Equipped
The Loudness function improves the volume of the
sound while listening at low volumes, increasing the bass
and treble.
To activate/deactivate this function, select the "Loud-
ness" setting in the AUDIO menu. The condition of the
function (on or off) is shown on the display for a few
seconds by the wording "Loudness On" or "Loudness
Off".
Preset/User/Classic/Rock/Jazz Functions — If
Equipped
The built-in equalizer can be activated/deactivated.
When the equalizer function is off, the audio settings can
only be changed by adjusting the "Bass" and "Treble"
settings, whereas when the function is on, the acoustic
4