Warranty; Safety Information; Specifications - Macrom M-BTS50.B User Manual

Warranty

Thank you for purchasing this Macrom product. Should your product need warranty service,
please return it to the shop where you buy it or to the Macrom distributor in your country.
The warranty does not cover damage due to improper use and or installation, incorrect
connections to power supply and audio video sources, exposure to excessive humidity,
unauthorized repair attempts or modifications.

Safety information

This product should be operated only with the type of power source indicated by the marking
on the back of the product. If you are not sure of the type of power supply in your home,
consult your product dealer. The product is not required to be grounded. Ensure the plug
is fully inserted into the wall outlet or extension cord plug to prevent pin exposure. When
using an extension power-supply cord or a power-supply cord other than that supplied with
the appliance, it should be fitted with the appropriate molded plugs and carry safety approval
appropriate to the country of use. Power-supply cords should be routed so that they are
not likely to be walked on, kinked or pinched by items placed on or against them. Do not
overload wall outlets, extension cords or multiple sockets, as this can result in a risk of fire
or electric shock. The product must be properly ventilated. Do not place the product on a bed,
sofa, or other similar surface. Do not cover the product with any items such as tablecloths,
newspapers, etc. The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products including amplifiers that produce heat. No naked
flame sources, such as lighted candles, should be placed on the apparatus.

Specifications

M-BTS50 can play music from a compatible music players using the Bluetooth connection or the audio
input . The operating range in Bluetooth mode is within 10 meters. M-BTS50 is compliant
with the following Bluetooth® specifications: Bluetooth V2.1 + EDR and supports A2DP and
AVRCP profiles. Power supply input 100-240 V AC – 50/60 Hz – 850 mA. Power consumption
85W. Output power 100 Watt (18W RMS x 2). Signal to noise ratio > 70dB. Channel separation
> 60dB Total harmonic distortions <0,5 % a 1W 1KHz.
-3-