1. Introduction In this manual you will find a detailed description of all the functions of the i-Reader and the i-Reader+. Unless otherwise stated, the mentions of “i-Reader” in this manual also apply to the i-Reader+. Read this manual carefully before you start using the i-Reader. If you still have any questions after reading this manual, please contact your supplier.
5. Installing the i-Reader Remove the i-Reader from its case and place it on a stable surface and connect the power cable. Power supply VGA port (monitor) USB ports (keyboard and/or mouse) 5.1 Power supply Connect the supplied power cable to the i-Reader according to the above image.
It is also possible to connect a keyboard and a mouse to the i-Reader. This will provide the user with an array of extra functions. See chapter 6.5 for further information.
Spoken user manual By pressing Play and Up simultaneously, you can access the spoken user manual of the i-Reader. Press Play to hear the manual. Press the Stop button twice to return to Live mode. Battery status (i-Reader+ only) By pressing Stop and Up simultaneously, you can hear the current battery status.
2 sec. 6.4 Controls Reading mode and Load mode When the page has been scanned, the i-Reader will automatically enter the Reading mode and start to read the text. Both the Reading mode and the Load mode have the following functions:...
6.5 Keyboard controls (requires monitor) By connecting a keyboard and a monitor to the i-Reader you will have access to many extra options to make reading and navigating more efficient. Reading Scan page and start reading Spacebar Pause / play...
“Esc” key, or “Alt” key mode 6.6 Mouse controls (requires monitor) By connecting a mouse and monitor to the i-Reader you will have access to the following options. Page scrolling: by moving the mouse to the edges of the screen, you can scroll across the page.
Enter submenu “Enter” key Previous menu “Backspace” key 7.2 Menu structure The i-Reader Menu has the following menu structure: Color In this submenu it is possible to choose how the text will be displayed on the monitor. • Original: Default. Original colors with regular contrast •...
No image after connecting Check the adapter connector. If the connector the i-Reader to the monitor. fits properly, switch the i-Reader off and on again using the green button. The start-up logo will soon appear. No sound from speaker more Check the connector of the adapter.
3 minutes on/off button. Wait until the ticking sound has and the i-Reader has not finished. Now switch off the power to the i-Reader started up. by flipping the power switch at the side of the device to “0”, then back to “1”. Start up the i-Reader with the green on/off button.
RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restrictions of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.