Table of Contents
Advertisement
{
SPECIFICATIONS
Operating Principle:
Directional Pattern:
Frequency Range:
Maximum SPL:
Sensitivity:
Output Impedance:
Recommended Load Imped-
ance:
Phantom power:
Polarity:
Polar Response:
Horizontal:
Vertical:
Transducer Element
Material:
Thickness:
Width:
Length:
Microphone Dimensions:
Height:
Width:
Depth:
Weight:
Shipping weight:
Connector:
}
Pressure gradient transducer
Bidirectional
<20 Hz to >20 kHz
141 dB SPL (1% third harmonic > 1 kHz)
6.2 mV/Pa (at 1 kHz, no load)
92 Ω broadband
1.0 kΩ or greater
P48 phantom power, 7 mA
Pin 2 high for positive pressure at the
front of the microphone.
Native bidirectional, figure-of-8 pattern
Up to 90 dB rejection at right angles to the
front/back axis.
Level changes with angle of incidence, but
frequency response is consistent.
Pure aluminum corrugated ribbon
1.8 µm
0.185 in (4.7 mm)
2.35 in (59.7 mm)
8.83 in (32.4 cm)
1.62 in (11.7 cm)
1.62 in (9.5 cm)
12 oz (335 g)
1 lb 13 oz (810 g)
XLR-3M
12
Advertisement
Table of Contents
