1. Manuals
  2. Brands
  3. Teracom Manuals
  4. Modem
  5. T2-B-Gawv1.4U10Y-BI
  6. User manual

Teracom T2-B-Gawv1.4U10Y-BI User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T2-B-Gawv1.4U10Y-BI and is the answer not in the manual?

Questions and answers

Summary of Contents for Teracom T2-B-Gawv1.4U10Y-BI

  • Page 2: Table Of Contents

    Contents Introduction ......................1 Packing List ................... 1 Safety Cautions ..................1 LEDs and Interfaces ................2 Hardware Installation ..................5 Web Configuration Management ............... 7 Preparation before Login ............... 7 3.1.1 Setup ..................7 3.1.2 Setting up WAN and LAN connections ........7 3.1.3 PC Network Configuration ............
  • Page 3 PPP over Ethernet (PPPoE) Mode............ 121 RFC2684 (Bridged) + Fixedly-Assigned IP Address Mode ....123 RFC2684 (Bridged) + DHCP Mode ........... 124 RFC2684 (Routed) + NAT Mode ............125 External PPPoE Dial-up Mode ............126 Teracom Limited An ISO Certificed Company...

  • Page 4: Introduction

    Introduction The T2-B-Gawv1.4U10Y.BI is an ADSL2+ access device that supports multiple line modes. It supports ADSL2/ADSL2+ and is backward compatible to ADSL. It also offers auto-negotiation capability for different standards (e.g., G.dmt, T1.413 Issue 2) according to the settings of digital subscriber line access multiplexer (DSLAM) in the central office.

  • Page 5: 1.3 Leds And Interfaces

    The device has successful Internet connection. Data is being transmitted on the Green Blinks Internet. Internet The Internet connection is failed or DSL has no synchronization. The device is dialing up before obtaining IP address successfully by PPP. Teracom Limited An ISO Certificed Company...
  • Page 6 The following table describes the interfaces of the device. Interface Description Power switch, power on or power off the device. Power interface, for connecting to the power adapter of 12 V Power DC, 1 A. Teracom Limited An ISO Certificed Company...
  • Page 7 RJ-45 interfaces, for connecting to the Ethernet interface of LAN1/2/3/4 PC or Ethernet devices through the Ethernet cable. RJ-11 interface for connecting to the telephone set through Internet the telephone cable. Connect to phones for VoIP application. Teracom Limited An ISO Certificed Company...

  • Page 8: Hardware Installation

    Hardware Installation Step 1 Connect the Internet interface of the device and the Modem interface of the splitter through a telephone cable. Connect the phone to the Phone interface of the splitter through a telephone cable. Connect the incoming line to the Line interface of the splitter. The splitter has three interfaces: Line: Connect to a wall phone interface (RJ-11 jack).
  • Page 9 If you really need to add a telephone set before the splitter, you must add a microfilter before a telephone set. Do not connect several telephones before the splitter or connect several telephones with the microfilter. Teracom Limited An ISO Certificed Company...

  • Page 10: Web Configuration Management

    LAN side and it is recommended to configure your LAN to obtain its IP address and the IP address of the DNS server automatically. This configuration principle is identical but operations are differently on each OS. Teracom Limited An ISO Certificed Company...
  • Page 11 Click OK to save the settings. Windows 2000/98/Me Open the Control Panel and click Network and Dialing Connections. Right-click the Ethernet connection icon and choose Properties from the shortcut menu. The Connection Properties window appears. Teracom Limited An ISO Certificed Company...

  • Page 12: 3.1.4 Connection Between The Modem And Pc

    Enter arp -a in the DOS window to check whether the PC can read the MAC address of the DSL. See Figure 4. Figure 4 Ping the management IP address (by default, 192.168.1.1) of the modem. Teracom Limited An ISO Certificed Company...

  • Page 13: Login In To The Modem

    Otherwise, the device may be damaged. Login in to the Modem Open the Internet Explorer and enter http://192.168.1.1. Enter the user name and a password. See Figure 5. The default user name and password are admin and admin respectively. Teracom Limited An ISO Certificed Company...

  • Page 14: Home

    This page displays the current status and configuration of the system. It contains the status of the modem. Such as, firmware version, system uptime, downstream data rate, upstream data rate, DSL status, wirelss and voice status. Teracom Limited An ISO Certificed Company...
  • Page 15 The following table describes the parameters of this page. Field Description System Information Model Name It displays the model name of the modem. Firmware Version The software version of the modem. System Up time Uptime of the modem. Internet Connection Teracom Limited An ISO Certificed Company...
  • Page 16 Note: The firmware version displayed in this page may be inconsistent with the actual software version, and is for reference only. 3.3.1.2 Advanced Click Advanced in the Overview page and the following page appears. Teracom Limited An ISO Certificed Company...
  • Page 17 User Manual for T2-B-Gawv1.4U10Y.BI Teracom Limited An ISO Certificed Company...

  • Page 18: System Log

    3.3.2 System Log Choose Home > System Log and the following page appears. In this page, you can consult the logs after relevant settings. You can also save the current settings to your PC. Teracom Limited An ISO Certificed Company...

  • Page 19: Troubleshooting

    Select the Internet connection that you want to test from the drop-down list (take bridge_8_81 for example). Click Run Diagnostic Tests and the following page appears. In this page, you can view the test result. Teracom Limited An ISO Certificed Company...

  • Page 20: Configuration

    Internet while roaming around in the converage area. Choose Configuration > Wireless Network and the following page appears. In this page, you can configure the parameters for wireless LAN clients that may connect to the modem. Teracom Limited An ISO Certificed Company...
  • Page 21 Internet, enable it. Select Country Choose the country where the modem works. Channel Selection You can choose Auto or Manual. Select Channel A channel is the radio frequency(ies) used by Teracom Limited An ISO Certificed Company...
  • Page 22 Click Advanced Settings in the Wireless Network page and the following page appears. In this page, you can configure the parameters for wireless LAN clients may connect to the modem. You can also modify the Fragmentation Threshold, Rts Threshold, Nitroxm Piggyback and WMM. Teracom Limited An ISO Certificed Company...
  • Page 23 The following table describes the parameters of this page. Field Description The fragmentation threshold is a way of limiting size packets (frames) Fragmentation Threshold transmitted over the network. If a packet exceeds configured fragmentation threshold, the fragmentation function is Teracom Limited An ISO Certificed Company...
  • Page 24 Select MAC Auth: There are three options: Disabled, BlackList, or WhiteList. If choose Disabled, all the PC are allowed to access the modem. If choose BlackList, the PC whose MAC address is listed is denied to access the modem. Teracom Limited An ISO Certificed Company...
  • Page 25 Right click Wireless Network Connection, and select View Available Wireless Networks. Step 3 In the Wireless Network Connection page, refresh the network lists and select the network name (SSID) PRISM_WIRELESS, which is the default SSID name. Then click Connect. Teracom Limited An ISO Certificed Company...

  • Page 26: Internet Connection

    This page displays the information of the PVC after some effective configuration. 3.4.2.1 Connections Choose Configuration > Internet Connection and the following page appears. In this page, you can view the information of the PVC. Teracom Limited An ISO Certificed Company...
  • Page 27 PVCs. The modem can be configured with eight PVCs at most. If you add more than eight PVCs, it refuses to add. : Delete an existing Internet connection. The following describes an example of deleteing bridge_0_32. Step 1 In the following page, click to delete bridge_0_32. Teracom Limited An ISO Certificed Company...
  • Page 28 User Manual for T2-B-Gawv1.4U10Y.BI Step 2 The system deletes bridge_0_32. After the deletion, the following page appears. Teracom Limited An ISO Certificed Company...
  • Page 29 User Manual for T2-B-Gawv1.4U10Y.BI : Modify an existing Internet connection. The following describes an example of modifying bridge_8_35. Step 1 In the following page, click to modify bridge_8_35. Teracom Limited An ISO Certificed Company...
  • Page 30 User Manual for T2-B-Gawv1.4U10Y.BI Step 2 The following page appears. In this page, you can modify VPI, VCI and service category. Teracom Limited An ISO Certificed Company...
  • Page 31 0 to 8000. CBR: Constant bit rate (CBR) is a coding mode. It is adapted for strict requirement to delay and quality of data packets transmission. Its peak cell rate range is from 0 to 7100. Teracom Limited An ISO Certificed Company...
  • Page 32 After proper modifications, click Next and the following page appears. In the page, you can modify the configure connection type, such as encapsulation type or encapsulation mode (The mode is only adapted for RFC2684 protocol). Teracom Limited An ISO Certificed Company...
  • Page 33 The following describes an example of adding PVC 0/32. Step 1 In the following page, click Add to add PVC 0/32. Step 2 The following page appears. In this page, you can modify VPI, VCI, and service categories. Teracom Limited An ISO Certificed Company...
  • Page 34 0 to 8000. CBR: Constant bit rate (CBR) is a coding mode. It is adapted for strict requirement to delay and quality of data packets transmission. Its peak cell rate range is from 0 to 7100. Teracom Limited An ISO Certificed Company...
  • Page 35 The value of PCR should be greater than SCR, and MBS is usually less than 10. service category merely is effective to upstream. Step 3 After proper modifications, click Next and the following page appears. In this page, you can modify Internet connection protocol and encapsulation type. Teracom Limited An ISO Certificed Company...
  • Page 36 User Manual for T2-B-Gawv1.4U10Y.BI Sample 1: PPP over ATM (PPPoA) Step 1 Select PPP over ATM (PPPoA) protocol and set the encapsulation type to VC MUX (depending upon the uplink equipment, generally VC MUX). Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 37 Add Default Route Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Enter the correct broadband user name and password. Select a proper PPP connection mode. Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 38 DSLAM or the up-link equipment is abnormal, the PPP connection will not be broken. Dial on Demand: After the device is powered on, the PPP dial-up performs automatically. If the device does not Teracom Limited An ISO Certificed Company...
  • Page 39 PPP connection manually again if you select manually connect. Enter the waiting time in the field. Step 4 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 40 User Manual for T2-B-Gawv1.4U10Y.BI Check the configuration according to the requirements. When you ensure that the configuration is correct, click Apply. The following page appears. Teracom Limited An ISO Certificed Company...
  • Page 41 In this example, the modem must be configured as built-in PPPoA + NAT. Select Obtain an IP address automatically, Enable NAT, and Add Default Route. The following table describes the parameters of this page. Teracom Limited An ISO Certificed Company...
  • Page 42 Add Default Route Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Enter the correct broadband user name and password. Select a proper PPP connection mode. Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 43 PPP connection. If the device does not detect the data-flow of the user continuously within the preset minutes, device automatically releases PPP connection. difference between manually connect and dial on demand is that you must start Teracom Limited An ISO Certificed Company...
  • Page 44 Click Next and the following page appears. In this page, you can confirm the modification. Sample 3: PPP over Ethernet (PPPoE) Step 1 Select PPP over Ethernet (PPPoE) protocol. Set to LLC/SNAP encapsulation type and Bridged encapsulation mode. Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 45 In this example, select Obtain an IP address automatically, Enable NAT, and Add Default Route. The following table describes the parameters of this page. Field Description Enable/Disable Enable or disable the access concentrator. Access Concentrator Teracom Limited An ISO Certificed Company...
  • Page 46 Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Enter the correct broadband user name, password and confirm password. Select a proper PPP connection mode. Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 47 Always On: After the device is powered on, the system performs PPP dial-up Session established by automatically. If the device is powered off, DSLAM or the up-link equipment is abnormal, the PPP connection will not be broken. Teracom Limited An ISO Certificed Company...
  • Page 48 PPP connection manually again if you select manually connect. Enter the waiting time in the field. Step 4 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 49 User Manual for T2-B-Gawv1.4U10Y.BI Step 5 Check the configuration according to the requirements. When you ensure that the configuration is correct, click Apply. The following page appears. Teracom Limited An ISO Certificed Company...
  • Page 50 Select PPP over Ethernet for IPv6 (PPPoE IPv6) protocol. Set to LLC/SNAP encapsulation type and Bridged encapsulation mode. Then click Next. Step 2 In this example, select Obtain an IP address automatically, Enable NAT, and Add Default Route. Teracom Limited An ISO Certificed Company...
  • Page 51 Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Enter the correct broadband user name, password and confirm password. Select a proper PPP connection mode. Then click Next. Teracom Limited An ISO Certificed Company...
  • Page 52 Always On: After the device is powered on, the system performs PPP dial-up Session established by automatically. If the device is powered off, DSLAM or the up-link equipment is abnormal, the PPP connection will not be broken. Teracom Limited An ISO Certificed Company...
  • Page 53 PPP connection manually again if you select manually connect. Enter the waiting time in the field. Step 4 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 54 Step 1 Select RFC2684 (IPv4) protocol. Set to LLC/SNAP encapsulation type and Bridged encapsulation mode. Then click Next. Step 2 In this example, select Obtain an IP address automatically, Enable NAT, and Add Default Route. Teracom Limited An ISO Certificed Company...
  • Page 55 Add Default Route Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 56 Sample 6: RFC2684 (IPv6) Step 1 Select RFC2684 (IPv6) protocol. Set to LLC/SNAP encapsulation type and Bridged encapsulation mode. Then click Next. Step 2 In this example, select Obtain an IPv6 address automatically and Add Default Route. Teracom Limited An ISO Certificed Company...
  • Page 57 Add Default Route Normally, it must be selected. Otherwise, you have to add a default route manually. Step 3 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 58 Step 1 Select Bridging protocol. Set to LLC/SNAP encapsulation type and Bridged encapsulation mode. Then click Next. Step 2 In this example, select Obtain an IP address automatically, Enable NAT, and Add Default Route. Teracom Limited An ISO Certificed Company...
  • Page 59 Use the following DNS address, select it and enter the primary DNS server address server and secondary DNS server. Step 3 Click Next and the following page appears. In this page, you can confirm the modification. Teracom Limited An ISO Certificed Company...
  • Page 60 User Manual for T2-B-Gawv1.4U10Y.BI Step 4 Check the configuration according to the requirements. When you ensure that the configuration is correct, click Apply. The following page appears. Teracom Limited An ISO Certificed Company...
  • Page 61 User Manual for T2-B-Gawv1.4U10Y.BI 3.4.2.2 ADSL Click ADSL in the Internet Connection Configuration page and the following page appears. In this page, you can modify ADSL parameters. Teracom Limited An ISO Certificed Company...
  • Page 62 User Manual for T2-B-Gawv1.4U10Y.BI Click Basic Attributes and the following page appears. It lists all specific ADSL attributes. In this page, you can configure the settings. Teracom Limited An ISO Certificed Company...
  • Page 63 Defaults: There are five options. Choose one line mode you need. The default setting checks the most modulation modes. The modem negotiates the modulation mode with the DSLAM. The following table describes the ADSL data rate standards. Data rate standard Uplink Downlink Teracom Limited An ISO Certificed Company...
  • Page 64 Select Enabled (By default, MAC Spoofing is disabled) and click Next. Step 2 Enter the MAC address and click Next. Step 3 Check the configuration. If you ensure that your configuration is correct, click Confirm. Teracom Limited An ISO Certificed Company...

  • Page 65: Local Network (Lan)

    Choose Configuration > Local Network (LAN) and the following page appears. In this page, you can set the IP address and subnet mask of LAN. The following table describes the parameters of this page. Field Description Primary IP Address Teracom Limited An ISO Certificed Company...
  • Page 66 3.4.3.3 DNS Client Click DNS Client in the Local Network Configuration page and the following page appears. A DNS server is any PC registered to join the DNS. A DNS server Teracom Limited An ISO Certificed Company...
  • Page 67 Dial-up under bridge mode, the DNS setting is inefficient. When the DNS sends the request, the DNS client parses them by itself. If the parse is failed, it is delivered to a superior DNS server. DNS client can record some domain Teracom Limited An ISO Certificed Company...
  • Page 68 Click Create a New DNS hostname entry manually and the following page appears. The following table describes the parameters of this page. Field Description Host Name Enter the domain name. IP Address Enter the valid IP address of LAN host. Teracom Limited An ISO Certificed Company...

  • Page 69: Voice Configuration

    Select Enable (SIP) from the VoIP Functionality drop-down list, select the IP interface name and correct region. Click Go To Advanced view and the following page appears. In this page, you can configure more settings of the VoIP parameter. Teracom Limited An ISO Certificed Company...
  • Page 70 User Manual for T2-B-Gawv1.4U10Y.BI 3.4.4.2 Click SIP in the VoIP Configuration page and the following page appears. In this page, you can view and modify the related settings of the SIP protocol. Teracom Limited An ISO Certificed Company...
  • Page 71 Enter the proxy and the registrar in the corresponding fields. The proxy can be the IP address of the SIP server. Generally, the registrar is as same as proxy. Click Go To Advanced view and the following page appears. It provides more parameters for you to modify. Teracom Limited An ISO Certificed Company...
  • Page 72 Click End Points in the VoIP Configuration page and the following page appears. In this page, you can view and modify end point settings, such as the login name, password. You can also view the registration status. Teracom Limited An ISO Certificed Company...
  • Page 73 Enter End Point Name (such as 755222666, which is the called number) and other parameters. Then boot the system to take the settings effect immediately. The registration status display Registered if it is registered in the SIP server successfully. Teracom Limited An ISO Certificed Company...
  • Page 74 You can activate or deactivate certain services. It is recommended not to modify the default digit map, if you want to make VoIP call. 3.4.4.5 VoIP Configuration Example The following describes the example of the voice configuration: Teracom Limited An ISO Certificed Company...
  • Page 75 IP Interface Name drop-down list, such as iplan. Then select the region. Step 2 Click Apply and the following page appears. Enter the proxy and registrar that are the IP address of the SIP server. Teracom Limited An ISO Certificed Company...
  • Page 76 User Manual for T2-B-Gawv1.4U10Y.BI Step 3 Click Apply to take the settings effect. Step 4 Click End Points in the Voice Configuration page and the following page appears. Teracom Limited An ISO Certificed Company...
  • Page 77 The service state. Usually, you should choose Admin State inservice. After finishing the settings, reboot the modem to take the settings effective. If the login number is registered successfully, you can view the status. Teracom Limited An ISO Certificed Company...

  • Page 78: Dhcp Server

    PC. By default, DHCP server is enabled. It is used to edit the list of IP address that the DHCP server interfaces DHCP server operates on. DHCP server Teracom Limited An ISO Certificed Company...
  • Page 79 Click Server Settings and the following page appears. In this page, you can modify the DHCP server settings. Click Add Fixed Host and the following page appears. In this page, you can set host IP and MAC mapping. Teracom Limited An ISO Certificed Company...
  • Page 80 By default, it is 43200 seconds (12 hour). 3.4.5.3 Advanced Settings Click Advanced Settings and the following page appears. In this page, you can configure the advanced DHCP server classes and subnet-pools. Teracom Limited An ISO Certificed Company...
  • Page 81 User Manual for T2-B-Gawv1.4U10Y.BI Click Add in the DHCP Classes page and the following page appears. Teracom Limited An ISO Certificed Company...
  • Page 82 User Manual for T2-B-Gawv1.4U10Y.BI Enter the class name and class data, and select class type. Click Add to show the following page. Teracom Limited An ISO Certificed Company...
  • Page 83 User Manual for T2-B-Gawv1.4U10Y.BI Click : in the Subnet Pools page. You can attach an existent class name, and set its attribute. Click Apply and the following page appears. In this page, you can view its status. Teracom Limited An ISO Certificed Company...

  • Page 84: Dhcp Relay

    DHCP relay. DHCP relay is used to send the DHCP client request to other DHCP server across several physical and logical sub-networks. For a DHCP client, the relay acts as a DHCP server, and this operation is Teracom Limited An ISO Certificed Company...

  • Page 85: Ipv6 Prefix

    LAN side interface. Then, the modem advertises these prefixes in router advertisements on the LAN side. LAN side hosts can auto configure them using these prefixes. All prefixes are advertised as on-link and autonomous. Teracom Limited An ISO Certificed Company...

  • Page 86: Security

    Internet or limit the Internet access from PCs on your network. The IP filter feature enables you to create rules that control the forwarding of incoming and outgoing data between the LAN and WAN side. When you define an Teracom Limited An ISO Certificed Company...
  • Page 87 Enter the filter rule name and other parameters. Click Apply. In this example, enter aa in the Filter Rule Name field. This rule named aa can forbid any application corresponding to port from 1 to 80. Teracom Limited An ISO Certificed Company...

  • Page 88: Port Forwarding

    Choose Security > Port Forwarding and the following page appears. In this page, you can create, modify, and delete port forwarding rules. These rules allow applications or software to work on your PCs if the Internet connection uses NAT. Teracom Limited An ISO Certificed Company...

  • Page 89: Virtual Server

    Choose Security > Virtual Server and the following page appears. A virtual server is a PC on your local network that can be accessed from the Internet. All interfaces for virtual server is listed. Teracom Limited An ISO Certificed Company...

  • Page 90: Services

    All the systems on a physical network identify the multicast grouping of specific hosts through IGMP. The multicast routers learn this information and forward the multicast datagram to the corresponding interfaces. The IGMP proxy holds up the Teracom Limited An ISO Certificed Company...

  • Page 91: Ipv4 Routing

    The following table describes the parameters of this page. Field Description Destination The IP address that packets are sent to. The subnet mask of the destination IP Netmask address. Gateway The gateway that the packets pass by during Teracom Limited An ISO Certificed Company...
  • Page 92 Click Dynamic Routing in the IP Static Route Settings page. In this page, you can configure the dynamic routing for any existing interface. You can enable or disable operation mode and RIP version for a particular interface. Teracom Limited An ISO Certificed Company...

  • Page 93: Ipv6 Routing

    Check to enable related interfaces and then click Apply to take the settings effect immediately. 3.6.3 IPv6 Routing Choose Services > IPv6 Routing and the following page appears. In this page, you can configure static route and dynamic routing. Teracom Limited An ISO Certificed Company...

  • Page 94: Quality Of Service

    WAN interface. 3.6.4 Quality of Service Choose Services > Quality of Service and the following page appears. This page shows a summary of the QoS and scheduler settings available on the system. Teracom Limited An ISO Certificed Company...
  • Page 95 Click Add and the following page appears. In this page, you can specify quality of service (QoS) rules to upstream traffic. All of specified conditions in the traffic rule must be satisfied for the rule to take effect. Teracom Limited An ISO Certificed Company...
  • Page 96 User Manual for T2-B-Gawv1.4U10Y.BI Teracom Limited An ISO Certificed Company...

  • Page 97: Mac Filtering

    Click Rule in the Mac Filter Configuration page and the following page appears. Click and the following page appears. In this page, you can configure filtering rules on the system. The following table describes the parameters of this page. Teracom Limited An ISO Certificed Company...
  • Page 98 The destination MAC value is 00:1E:E3:00:2D:BC. After finishing the settings of rule status and action, click Apply to take it effect. 3.6.5.2 Profile Click Profile in the Mac Filter Configuration page. In this page, you can create and configure filtering profiles. Teracom Limited An ISO Certificed Company...
  • Page 99 Transport Choose Mac Address > Transport and the following page appears. In this page, you can attach or detach filtering profiles to a transport. You can also enable or disable filtering on a transport. Teracom Limited An ISO Certificed Company...
  • Page 100 Before attaching the filtering profile to the specified transport, the profiles and rules should be configured. For example, click of the Ethernet transport. . You can configure p1 attach Tx Path for the Ethernet transport, and it matches the corresponding settings of rule1. Teracom Limited An ISO Certificed Company...

  • Page 101: Dsl Home

    It provides the management of software, firmware by mirrors, status and capability monitor, diagnosis, and Web supervision to the user equipment. Choose DSL Home > Management Server and the following page appears. In this page, you can configure the parameters of the management server. Teracom Limited An ISO Certificed Company...
  • Page 102 CWMP. This password used only Password HTTP-based authentication of the modem. When read, this parameter returns an empty string, regardless of the actual value. Periodic Inform If you select Enable, the modem must periodically Teracom Limited An ISO Certificed Company...
  • Page 103 ACS to seek out available upgrades. If it is false, the modem may use other means for this purpose. Whether or not the modem must enable ACS ACS Discovery discovery from DHCP. Teracom Limited An ISO Certificed Company...

  • Page 104: Cwm Parameters

    This page displays the current status and configuration of the FXS port 3.8.1.1 Basic Choose Port Statistics > Voipfxs0 and the following page appears. In this page, you can view the information of the FXS port. Teracom Limited An ISO Certificed Company...
  • Page 105 Reset to the default values after rebooting. 3.8.1.2 Advanced Click Advanced in the Voipfxs0 Port Configuration page and the following page appears. In this page, you can view the information of the FXS port. Teracom Limited An ISO Certificed Company...
  • Page 106 User Manual for T2-B-Gawv1.4U10Y.BI Teracom Limited An ISO Certificed Company...

  • Page 107: Voipcmdstat

    This page displays the current status and configuration of the voipcmdstat port. 3.8.2.1 Basic Choose Port Statistics > Voipcmdstat and the following page appears. In this page, you can view the the information of voipcmdstat port. Teracom Limited An ISO Certificed Company...
  • Page 108 User Manual for T2-B-Gawv1.4U10Y.BI 3.8.2.2 Advanced Click Advanced in the Voipcmdstat Port Configuration page and the following page appears. In this page, you can view the the information of voipcmdstat port. Teracom Limited An ISO Certificed Company...

  • Page 109: Dsl

    Choose Port Statistics > DSL and the following page appears. In this page, you can view the the following information. The attributes and values are displayed as the output depending on the configuration of the DSLAM that the modem is connected with. Teracom Limited An ISO Certificed Company...
  • Page 110 User Manual for T2-B-Gawv1.4U10Y.BI The following table describes the parameters of this page. Field Description Driver Version The information of driver version. APIVersion Application program interface (API) version. Teracom Limited An ISO Certificed Company...
  • Page 111 The following table describes the parameters of this page. Field Description CACMode Connection admission control (CAC) mode. Traffic Shaping The volume of adapter communication. Direct memory access supported high Is Dsl Dma Up broadband. Teracom Limited An ISO Certificed Company...

  • Page 112: Ethernet0/1/2/3

    Ethernet port. The following table describes the parameters of this page. Field Description The network adapter interface identifier with 48 bits unique global address. Connected It displays the connection status. Teracom Limited An ISO Certificed Company...
  • Page 113 CLI. Enter ethernet set ?. The attributes is displayed as the output of this command. Its function depends on the configuration of the DSLAM and the capability of the central office the modem connected to. Teracom Limited An ISO Certificed Company...

  • Page 114: Wireless

    3.8.5.2 Advanced Click Advanced in the Wireless Port Configuration page and the following page appears. In this page, you can view the following information of the wireless port. Teracom Limited An ISO Certificed Company...
  • Page 115 User Manual for T2-B-Gawv1.4U10Y.BI Note: Teracom Limited An ISO Certificed Company...

  • Page 116: Admin

    If it is not upgraded successfully, do not restart the modem or switch off the modem. Try to upgrade the image file again until it is successful. If it is upgraded successfully, restart the modem immediately to take the new software effect. Teracom Limited An ISO Certificed Company...

  • Page 117: Back & Restore

    User Manual for T2-B-Gawv1.4U10Y.BI 3.9.2 Back & Restore Choose Admin > Back & Restore and the following page appears. Click Backup to save the current system configuration. Conexant.icf is the default file. Teracom Limited An ISO Certificed Company...

  • Page 118: Reboot

    Any NAT or firewall configuration is bypassed. This allows a network administrator access to the configuration of the device without having to visit the site. Teracom Limited An ISO Certificed Company...

  • Page 119: Lan Access

    User Manual for T2-B-Gawv1.4U10Y.BI 3.9.5 Lan Access Choose Admin > Lan Access and the following page appears. It is used to enable or restrict LAN side management access to the modem. Teracom Limited An ISO Certificed Company...

  • Page 120: Change Password

    This page displays the current time configuration of the system. 3.9.7.1 SNTP Client Click SNTP Client in the SNTP Client Configuration page. In this page, you can modify the SNTP client configuration. By default, the time zone is configured as UTC. Teracom Limited An ISO Certificed Company...
  • Page 121 You can add a server by using host name or IP address. It starts the synchronization process automatically if it exists a effective server in the association list. Sample 1: Add a host Name of the SNTP server. (The hostname: time.nist.gov, which belongs to American time server). Teracom Limited An ISO Certificed Company...
  • Page 122 Sample 2: Add IP address of the SNTP server. Before adding IP address, you should ping the IP address of the SNTP server. It takes effective if ping successes. Click to delete a single server association from the client list. Teracom Limited An ISO Certificed Company...

  • Page 123: Network Topology

    The IP address of the PC can be fixed (as in this example) or assigned through DHCP server of the modem. If it is assigned by DHCP server, the DHCP function of the modem must be enabled. The IP address of the DHCP address pool is Teracom Limited An ISO Certificed Company...

  • Page 124: Ppp Over Ethernet (Pppoe) Mode

    BRAS. Otherwise, you cannot access your ISP. In actual applications, Enable NAT must be selected. PPP over Ethernet (PPPoE) Mode Dynamic Public IP 136.1.1.1 192.168.1.3 assigned by BRAS 192.168.1.1 Pool：136.1.1.0 Gawv1.4U10Y-B1 STM-1 Ethernet PPPOE + NAT BRAS DSLAM PC(s) 192.168.1.2 RADIUS Server PPP over Ethernet Teracom Limited An ISO Certificed Company...
  • Page 125 R_0_32 is 136.1.1.2. If Enable NAT is disabled during the configuration, you must configure the modem on the BRAS. Otherwise, you can not access your ISP. In actual applications, Enable NAT must be selected. Teracom Limited An ISO Certificed Company...

  • Page 126: Rfc2684 (Bridged) + Fixedly-Assigned Ip Address Mode

    LLC/SNAP and the encapsulation mode to Bridged. Click Next. In the Configure WAN IP Settings page, enter WAN IP Address, WAN Subnet Mask, and Default Gateway provided by your ISP. Select Enable NAT and Add Default Route, and click Next. Teracom Limited An ISO Certificed Company...

  • Page 127: Rfc2684 (Bridged) + Dhcp Mode

    The IP address of the PC can be fixed (as in this example) or assigned through DHCP server of the modem. If it is assigned by the DHCP server, the DHCP function of the modem must be enabled. The IP address of the DHCP address pool Teracom Limited An ISO Certificed Company...

  • Page 128: Rfc2684 (Routed) + Nat Mode

    D S L A M P C (s) Description In this example, the modem is connected to the DSLAM through PVC 8/81 and the access mode is the IPOA+NAT. The downlink port of DSLAM is encapsulated in Teracom Limited An ISO Certificed Company...

  • Page 129: External Pppoe Dial-Up Mode

    LAN IP address and DHCP server information, you can operate in the Local Network (LAN) page and DHCP Server page. After the configuration is done, WAN-side interface of the the modem is R_0_32. External PPPoE Dial-up Mode Teracom Limited An ISO Certificed Company...
  • Page 130 Check the network configuration and ensure that all the settings are consistent with the data provided by your ISP. Then click Apply. Note: In the pure Bridging mode, there is no interface at the WAN side of the modem. Teracom Limited An ISO Certificed Company...
  • Page 131 User Manual for T2-B-Gawv1.4U10Y.BI Teracom Limited An ISO Certificed Company...

Table of Contents