Table of Contents
Advertisement
Quick Links
Federal Communications Commission (FCC) Statement (06572C)
Federal Communications Commission (FCC) Statement (06572C)
Federal Communications Commission (FCC) Statement (06572C)
Federal Communications Commission (FCC) Statement (06572C)
Federal Communications Commission (FCC) Statement (06572C)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with instructions contained in this manual, may cause harmful interference
to radio and television communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-
REORIENT OR RELOCATE THE RECEIVING ANTENNA
-
INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND THE RECEIVER
-
CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM
THAT OF THE RECEIVER
-
CONSULT THE DEALER OR AN EXPERIENCED AUDIO/TELEVISION TECHNICIAN
NOTE: Connecting this device to peripheral devices that do not comply with Class B
requirements, or using an unshielded peripheral data cable, could also result in
harmful interference to radio or television reception.
The user is cautioned that any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate
this equipment.
To ensure that the use of this product does not contribute to interference, it is
necessary to use shielded I/O cables.
Copyright
Copyright
Copyright
Copyright
Copyright
This manual is copyrighted with all rights reserved. No portion of this manual may be
copied or reproduced by any means.
While every precaution has been taken in the preparation of this manual, no responsibility
for errors or omissions is assumed. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Trademarks
Trademarks
Trademarks
Trademarks
Trademarks
All brand names, logos and registered trademarks mentioned are property of their
respective owners.
Electronic Emission Notices
Electronic Emission Notices
Electronic Emission Notices
Electronic Emission Notices
Electronic Emission Notices
1 1 1 1 1
Advertisement
Table of Contents
Related Manuals for VTech ATI A3 + ALI M1535D+
Summary of Contents for VTech ATI A3 + ALI M1535D+
- Page 1 1 1 1 1 1 Electronic Emission Notices Electronic Emission Notices Electronic Emission Notices Electronic Emission Notices Electronic Emission Notices Federal Communications Commission (FCC) Statement (06572C) Federal Communications Commission (FCC) Statement (06572C) Federal Communications Commission (FCC) Statement (06572C) Federal Communications Commission (FCC) Statement (06572C) Federal Communications Commission (FCC) Statement (06572C) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
-
Page 2: Table Of Contents
2 2 2 2 2 Table of Contents Table of Contents Table of Contents Table of Contents Table of Contents HARDWARE CONFIGURATION HARDWARE CONFIGURATION ............................3 3 3 3 3 ..............HARDWARE CONFIGURATION HARDWARE CONFIGURATION HARDWARE CONFIGURATION ............................Key Features ....................... -
Page 3: Hardware Configuration Hardware Configuration
3 3 3 3 3 HARDWARE CONFIGURATION HARDWARE CONFIGURATION HARDWARE CONFIGURATION HARDWARE CONFIGURATION HARDWARE CONFIGURATION Features Features : : : : : Features Key Features Features Chipset Chipset Chipset Chipset Chipset • ATI A3 + ALI M1535D+ Chipset. Processor Processor Processor Processor Processor... - Page 4 4 4 4 4 4 On Board VGA On Board VGA On Board VGA On Board VGA On Board VGA Integrated ATI Radeon 7000 graphic core. • Supports Dual display (one CRT, one TV out). • • Integrated DAC and CRT controllers. Full screen/Full speed video playback.
-
Page 5: Motherboard Layout
5 5 5 5 5 Motherboard Layout Motherboard Layout Motherboard Layout Motherboard Layout Motherboard Layout The following diagrams show the relative positions of the jumpers, connectors, major components and memory banks on the motherboard. NOTE Be sure to check the cable orientation in order to match the colored strip to the pin 1 end of the connector. -
Page 6: Jumper Settings
6 6 6 6 6 Jumper Settings Jumper Settings Jumper Settings Jumper Settings Jumper Settings This chapter explains how to configure the motherboard’s hardware. Before using your computer, make sure all jumpers and DRAM modules are set correctly. Refer to this chapter whenever in doubt. -
Page 7: Pin Assignment
7 7 7 7 7 Pin Assignment Pin Assignment Pin Assignment Pin Assignment Pin Assignment Internal Audio Connector Internal Audio Connector Internal Audio Connector Internal Audio Connector Internal Audio Connector J11 : AUX-IN J11 : AUX-IN J11 : AUX-IN J11 : AUX-IN J11 : AUX-IN USB Connector USB Connector... -
Page 8: Hardware Setup Hardware Setup
8 8 8 8 8 Hardware Setup Hardware Setup Hardware Setup Hardware Setup Hardware Setup To Install DDR DIMMs To Install DDR DIMMs To Install DDR DIMMs To Install DDR DIMMs To Install DDR DIMMs 1. Locate the DDR DIMM sockets. 2. -
Page 9: Installing A New Processor
9 9 9 9 9 Installing a New Processor Installing a New Processor Installing a New Processor Installing a New Processor Installing a New Processor An upgrade processor can dramatically increase general system speed and performance. Most microprocessor upgrade kits include the following items: •... -
Page 10: Bios Setup Bios Setup
BIOS Setup BIOS Setup BIOS Setup BIOS Setup BIOS Setup This chapter discusses Award’s Setup Program built into the ROM BIOS. The Setup Program allows users to modify the basic system configuration. This special information is then stored in battery-backed RAM, which retains the setup information when the power is turned off. -
Page 11: Main Menu
Main Menu Main Menu Main Menu Main Menu Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from various setup functions and two exit choices. -
Page 12: Standard Cmos Features
Load Optimized The chipset defaults are settings which provide for maximum Defaults system performance. While Award has designed the custom BIOS to maximize performance, the manufacturer has the right to change these defaults to meet its needs. Set Password Changes, sets, or disables password. It allows you to limit access to the system and the Setup Program. -
Page 13: Advanced Bios Features
Date The date format is <day-of-the-week>. <month> <day> <year>. Time The time format is <hour> <Minute> <second> displayed in 24-hour military-time clock. For example, 1 p. m. is displayed as 13:00:00. IDE Primary These categories identify the types of the two channels that Master/Slave have been installed in the computer. -
Page 14: Advanced Chipset Features
Advanced Chipset Features Advanced Chipset Features Advanced Chipset Features Advanced Chipset Features Advanced Chipset Features This section allows you to configure DRAM clock, DRAM timing, AGP mode etc. The following figure is the details of Advanced Chipset Features. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features Memory Frequency For [SYNC]... -
Page 15: Integrated Peripherals
Integrated Peripherals Integrated Peripherals Integrated Peripherals Integrated Peripherals Integrated Peripherals The Integrated Peripherals Setup allows the user to configure the onboard IO, IRQ, DMA assignment etc. The following figure is the details of Integrated Peripherals. Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals On-Chip Primary IDE [Enabled]... -
Page 16: Power Management Setup
Power Management Setup Power Management Setup Power Management Setup Power Management Setup Power Management Setup The Power Management Setup Menu allows you to configure your system to most save energy while operating in a manner consistent with your own style of computer use. The following figure is the details of Power Management Setup. -
Page 17: Pnp/Pci Configurations
PnP/PCI Configurations PnP/PCI Configurations PnP/PCI Configurations PnP/PCI Configurations PnP/PCI Configurations This section describes how to configure the PCI bus system. This section covers some very technical items and it is recommended that only experienced users should make any changes to the default settings. The following figure is the details of PnP/PCI Configurations. -
Page 18: Set Password
Set Password Set Password Set Password Set Password Set Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ENTER ENTER ENTER ENTER ENTER PASSWORD: PASSWORD: PASSWORD: PASSWORD: PASSWORD:... -
Page 19: Flash Update Procedure
Flash Update Procedure Flash Update Procedure Flash Update Procedure Flash Update Procedure Flash Update Procedure A program AWDFLASH.EXE is included in the utility diskette or CD (X:\Utility\ AWDFLASH.EXE). The user is recommended to follow the procedure below to update the flash BIOS. (X: your CD driver letter). -
Page 20: Appendix
APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX Select the Heatsink Select the Heatsink Select the Heatsink Select the Heatsink Select the Heatsink Any attempt to operate the AMD Athlon™ Processor without a suitable cooling solution will result in permanent damage to the processor and potentially other components within the system.