Adjustment Process Mode Menu - Sharp LC-40LE814E/RU Service Manual

LC-40/46LE814/824E/RU (1st Edition)

7. Adjustment process mode menu

The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
Page Line
1/21
1 MAIN Version
2 BOOT Version
3 Monitor Version
4 T-CON Version/LED CON Version
5 CPLD Version
7 CI+INFO/SECURE BOOT
8 FRC-N Auto Script Version
9 TCON Master/Slave Serial Version
10 TOUCH SENSOR UCON VERSION
11 LAMP ERROR
12 MONITOR ERR CAUSE
13 NORMAL STANDBY CAUSE
14 ERROR STANDBY CAUSE
2/21
1 INDUSTRY INIT
2 INDUSTRY INIT (-Public)
3 PUBLIC MODE
4 Center Acutime
5 RESET
6 Backlight Acutime
7 RESET
8 LAMP ERROR RESET
9 ADJ PARAM SET
10 VIC XPOS
11 VIC YPOS
12 VIC SIGNAL TYPE
13 VIC READ
3/21
1 TUNER ADJ
2 PAL+TUNER ADJ
3 TUNER ADJ (SMPTE)
4 PAL+TUNER ADJ (SMPTE)
5 TUNER ADJ (SMPTE CH57)
6 PAL+TUNER ADJ (SMPTE CH57)
7 TUNER CONTRAST A_GAIN
8 TUNER CONTRAST D_GAIN
9 TUNER CONTRAST OFFSET
4/21
1 PAL ADJ
2 SECAM ADJ
3 N358 ADJ
4 PAL CONTRAST A_GAIN
5 PAL CONTRAST D_GAIN
6 PAL CONTRAST OFFSET
7 SECAM CONTRAST A_GAIN
8 SECAM CONTRAST D_GAIN
9 SECAM CONTRAST OFFSET
10 N358 CONTRAST A_GAIN
11 N358 CONTRAST D_GAIN
12 N358 CONTRAST OFFSET
Item Description
1xxx (xxxxx)
xxxxxxxx/xxxx
xxxxx/YES
1) xxxxxx 2) xxxxxx
3) xxxxxx 4) xxxxxx
Remarks (adjustment detail, etc.)
Main software version
xxxxxxx BOOT Version.
xxxxxxx Monitor software version
T-CON/H.264 Version
xxxxxxx CPLD Version.
CI+ Key Information/SECURE BOOT
xxxxxxx
xxxxxxx
xxxxxxx
0 Number of termination due to lamp error.
Last error standby cause.
0 Situation that became standby at the end.
(Excluding the error)
0 0 0 0 Error standby cause
Enter Initialization to factory settings execution.
OFF Initialization to factory settings execution.
(Public mode is excluded)
OFF Public mode ON/OFF setting
— Main operating hours.
OFF Main operating hours reset.
— Backlight operating hours.
OFF Backlight operating hours reset.
OFF Lamp error reset.
Enter ADJ PARAM SET
0 X-coordinate setting for VIC READ
0 Y-coordinate setting for VIC READ
MAIN Signal type setting for VIC READ
OFF Picture level acquisition function
(Level appears in green on the upper right)
Enter TUNER auto adjustment execution
Enter PAL TUNER auto adjustment execution
Enter TUNER auto adjustment execution (SMPTE)
Enter PAL TUNER auto adjustment execution (SMPTE)
Enter TUNER auto adjustment execution (SMPTE CH57)
Enter PAL TUNER auto adjustment execution (SMPTE CH57)
16 TUNER signal level adjustment
2073 TUNER signal level adjustment
256 TUNER signal level adjustment
Enter PAL adjustment
Enter SECAM adjustment
Enter N358 adjustment
14 PAL contrast adjustment
2149 PAL contrast adjustment
255 PAL contrast adjustment
14 SECAM contrast adjustment
2123 SECAM contrast adjustment
256 SECAM contrast adjustment
14 N358 contrast adjustment
2192 N358 contrast adjustment
255 N358 contrast adjustment
4 – 4