BEFORE INSTALLING AND USING THE PRODUCT, PLEASE READ THE INSTRUCTIONS THOROUGHLY, AND RETAIN THEM FOR FUTURE REFERENCE. PRODUCT OVERVIEW INPUT OUTPUT 1. Power Button 5. Dust Cover 2. Seatbelt Cutter 6. Input 3. Lanyard Loop 7. Output 4. Glass Breaker with Protective Cap 8.
Page 3
CHECKING POWER LEVELS To show the battery status, press the Power Button and the LED Indicator Lights will indicate the Flashlight’s power level according to the LED Power Levels When diagram. Charging the Flashlight: 1 - 30% Charged When charging the Flashlight, 31 - 70% Charged the LED Indicators will FLASH 71 - 99% Charged...
2. Charging Your Smartphone, Etc: Using your device’s supplied charging cable (Apple ® Lightning cable, Micro USB cable, etc.), plug your ™ smartphone, tablet or other USB powered device into the USB Output Port of the Flashlight. Press and Hold the Power Button on the Flashlight for Two Seconds to begin charging your device.
Page 5
Glass Breaker: Remove the protective cap from this flashlight and use it to break the glass in your vehicle. Then push away any remaining broken glass to escape. Important: Intended only to break tempered automobile door window glass during a vehicular accident. Unit will not break windshields or other windows made of laminated glass.
MAINTENANCE In order to keep your Flashlight operating at maximum potential, please follow these guidelines: 1. Recharge the Flashlight every 2 months when not in use. Charge to at least 40%, as this will extend the battery life. 2. Never expose to high heat environments. Avoid extreme temperatures of hot or cold as it will decrease the overall battery performance.
• Ensure charge port is clear of any foreign objects before using. Do not force incompatible connectors into any port. • Do not used damaged cables and wires with device. • Never leave charger unattended while charging. • Do not attempt to disassemble the device. Any attempts to do so will void all warranties on this product.
accordance with local laws. • If unusual expansion is detected, disuse device immediately. In case of fire, use lithium approved “Class D Type” Fire Extinguishers on device. • Do not expose or dispose of device into fire. • In the unfortunate case of a leak and electrolyte comes in contact with skin, wash area with water and soap.
• Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Page 10
APO address. Please include your check or money order in the amount of: USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit) • USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit) • USD$16.00, for items $100.00 and up. (Price Paid Per Unit) •...
Need help?
Do you have a question about the JF-500-5200 and is the answer not in the manual?
Questions and answers