Summary of Contents for STL U-1100
- Page 1 USB 3.0 Dual Video Docking Station User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners.
-
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............ 3 1.2 Features ................ 3 1.3 System Requirements ..........4 1.4 Package Contents ............4 1.5 Hardware Layout ............5 Chapter 2: Getting Started ..........6 2.1 Driver Installation ............6 2.1.1 Installation for Windows ........ -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction This USB 3.0 Dual Video Docking Station is designed to expand connectivity to your Ultrabook™ or Hybrid tablet/laptop via single USB 3.0 port. It features dual display ports (1 HDMI and 1 DVI) to enable your system’s display capability, supporting HD resolution and multiple display modes including primary, extended and mirrored. -
Page 4: System Requirements
with USB 2.0 specification Extended Desktop (Default), Mirror Desktop, Primary Display High resolutions for display up to 2048 x 1152 1.3 System Requirements Windows® XP 32-bit, Vista/7/8/8.1 (32/64 bit); Mac OS X 10.6 or above Available USB port (USB 3.0 recommended) ... -
Page 5: Hardware Layout
1.5 Hardware Layout 1. DVI output port: Connect to a DVI monitor 2. HDMI output port: Connect to a HDMI monitor 3. USB 3.0 downstream ports: Connect USB peripheral devices 4. Power jack: Connect to the optional power adapter 5. Power indicator: Lights up when the power is on 6. -
Page 6: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Driver Installation Follow the procedures below to install the driver and then connect the USB 3.0 Dual Video Docking Station to your system. 2.1.1 Installation for Windows Insert the provided CD into your disk drive. The CD-ROM will start automatically. -
Page 7: Installation For Mac Os X
launch the install program. Please wait while Windows configures DisplayLink Core Softare. Your screens may temporarily go black or flashing during this process. When finished, the installation screen will disappear and you will return to your desktop. Note: On some machines, you may need to reboot before you can use USB 3.0 Dual Video Docking Station. -
Page 8: Hardware Installation
click “Drivers” folder. Select “DisplayLink Software Installer” to begin installing the DisplayLink Driver on your Mac. Follow the instructions on screen to install the driver. After driver installation is complete, you must restart your computer. 2.2 Hardware Installation (Optional): Plug the power adapter into the power jack of the MN3000100012 Page 8... - Page 9 Docking Station. Connect the USB 3.0 Dual Video Docking Station: Connect the USB 3.0 Dual Video Docking Station to an available USB 3.0 on the host computer. Then a pop-up message will appear in the notification area indicating the installation is complete.
-
Page 10: Verifying The Installation
the connection works properly. 2.3 Verifying the installation 2.3.1 Verifying for Windows Click on the “Device Manager” tab in the Windows Control Panel. Start > Control Panel > Device Manager In the USB Display Adapters group, an item named Displaylink USB 3.0 dock should be displayed. -
Page 11: Verifying For Mac Os X
2.3.2 Verifying for Mac OS X Choose About this Mac from the Apple menu. Click on More Info… In the Contents sidebar select USB from the Hardware section. Scroll the list to reveal the USB 3.0 Dual Video Docking Station information MN3000100012 Page 11... -
Page 12: Display Configuration
2.4 Display Configuration When USB 3.0 Dual Video Docking Station is attached, an icon appears in the taskbar. This gives you access to the DiaplayLink manager menu. To use the DisplayLink Manager Menu From the taskbar, click the DisplayLink icon A menu appears with several options. - Page 13 Screen Resolution: Click to select an available resolution. Note: • This function is disabled in mirror mode, as the resolution is defined by the resolution of the primary monitor • Screen Rotation: Rotates the screen according to the desired orientation Extend to: Extends the screen according to the desired orientation •...
- Page 14 viewing of multiple windows. The window will move off the primary display from the right side and enter the extended display from the left side Set as Main Monitor: Sets the extended screen as the main • screen Mirror: Duplicates the primary monitor to the monitor which •...
Need help?
Do you have a question about the U-1100 and is the answer not in the manual?
Questions and answers