KALATEL KTC-105 Installation Instructions

KTC-105
B/W Camera
The Kalatel KTC-105 is a B/W video camera that employs a 1/3-in. interline transfer charge-
coupled device (CCD). It has a solid-state imaging device with a maximum of 270,000 (EIA) picture
elements. The KTC-105 is lightweight, compact, and easy to install.
CAUTION!
Do not supply power to the unit before all installation steps have been completed.
I
NSTALLATION
To install the KTC-105, refer to Figure 1 and perform the following:
Lens Mode Switch
Iris Mode Switch
Video Out BNC
Figure 1. Connectors and adjustment switches of the KTC-105 used during installation
1) If you are using a C-mount lens, screw the provided C-mount adapter to the camera.
2) Screw the lens to the camera.
3) Set the iris mode switch to correspond with the iris:
● If you are using a manual or fixed iris lens, set the iris mode switch to EE, which will
engage the electronic iris.
● If you are using an automatic iris lens, set the iris mode switch to AI.
a) Set the lens mode switch to correspond with the lens:
For an auto iris lens with built-in EE amp, set the lens mode switch to VIDEO.
For an auto iris lens without EE amp, set the lens mode switch to DC.
b) Insert the iris lens plug into the auto iris lens connector:
For auto iris lens with built-in EE amp, follow the connections in Figure 2. (Refer to
the lens instructions.)
For auto iris lens without EE amp, follow the connections in Figure 3. (Refer to the
lens instructions.)
For Technical Support and Sales call 800-469-1676
LENS
VIDEO
DC
A-IRIS
AI EE
ON OFF
BLC
DC 12V
LEVEL
VIDEO
+
Auto Iris Connector
–
G
Terminal Block
1036024A / May 2001
1