Advertisement
Quick Links
RM-KB-LCD
Part #
RM-KB-LCD
Keyboard with LCD Display
Assembly Instructions
NOTE: 1) This product requires front and rear mounting using an 18.75" to 20.25" and 23.50"
to 26.25" range. Pre-configure rackrail within this range prior to installation of unit
2) Before installation, make sure all peripherals and computers have been turned off.
RM-KB-LCD must be locked in the closed position during installation
SPECIFICATIONS:
Bright active matrix TFT LCD Display
screen resolution: 1024 X 768 (15" screen)
Rear articulating cable carriers provide cable strain relief
Dual slide system allows for system monitoring while keyboard is in the closed position
105 key PS/2 keyboard with touch pad pointing device
Compact 1 space size
CAUTION: There may be systems, or external USB ports, with which this product will not be
compatible
I-00128
Instruction #
RM-KB-LCD
Part #
1 of 6
Page:
Voice 973-839-1011
Fax
973-839-1976
Instruction #
1280 X 1024 (17" screen)
F
Rev.
Assembly:
I-00128
Date:
full
middleatlantic.com
Rev.
F
U L
C
US LISTED
R
Adjustable mounting
range of 18.75" to 20.25"
and 23.50" to 26.25"
11/17/05
Advertisement
Related Manuals for Middle Atlantic Products RM-KB-LCD
Summary of Contents for Middle Atlantic Products RM-KB-LCD
- Page 1 26.25" range. Pre-configure rackrail within this range prior to installation of unit 2) Before installation, make sure all peripherals and computers have been turned off. RM-KB-LCD must be locked in the closed position during installation Adjustable mounting range of 18.75" to 20.25"...
-
Page 2: Tools Needed
TOOLS NEEDED: Rack screws (4) - No. 2 Phillips Screwdriver - 3/8" Nut Driver HARDWARE KIT CONTENTS: Hex key (1) Adjustable rear support ear (2) for 18.75" to 20.25" mounting range Cap screw (4) Adjustable rear support ear (2) for 23.50" to 26.25" mounting range Flat head screw (8) Rear support extension... - Page 3 1) Remove 4 flat head screws from each side and discard (See FIGURE A) FIGURE A Flat head screws to be discarded 2) Install rear left and right support extensions using supplied flat head screws (4 per extension) (See FIGURE B) TIP: Install all screws before final tightening Supplied flat head screws Left rear support...
- Page 4 When installing rackmount keyboard using the 23.50" to 26.25" mounting range, (see FIGURE D) When installing rackmount keyboard using the 18.75" to 20.25" mounting range, (see FIGURE E) 4) With unit in closed position, install rear support ears onto slider. Loosely install nuts 5) Attach rear support ears to rackrails using provided rack screws (2 per side).
-
Page 5: Control Panel
Install bottom 2 cap screws into front ears and tighten all 4 cap screws on front (See FIGURE F) FIGURE F 7) Attach provided connectors and power supply FIGURE G (See FIGURE G). Refer to "Connection (Rear view) Recommendations" on page 6 Connectors Power supply inlet... -
Page 6: Connection Recommendations
NO HASSLE 1 YEAR LIMITED WARRANTY Middle Atlantic Products, Inc. (the "Company") warrants the products manufactured by it to be free from defects in material or workmanship under normal use and conditions for a period of one (1) year from date of shipment by the Company. The...