Download
Share
Print this page
iLive ICB284 User Manual
  1. Manuals
  2. Brands
  3. iLive Manuals
  4. Speakers
  5. ICB284
  6. User manual
iLive ICB284 User Manual

iLive ICB284 User Manual

Bluetooth speaker with clock
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Bluetooth Speaker with Clock
User's Guide for Model No. ICB284 v1019-01

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FunCtionS anD ControlS
Source
Press to switch
between Radio,
Line In, and
Bluetooth
Power
Press to power the
radio on or off.
tun +/-
Press to tune the radio, or set
the time for the clock/alarm.

indicator lights

Bluetooth
alarm 2
alarm 1
PM
lED Display
to cycle through preset radio stations. In off mode, press and
hold to adjust the clock. While paired to a Bluetooth device,
Snooze/Dimmer
Press to snooze the alarm after it sounds.
Press and hold to dim the brightness of the LED display.
Press to set the Sleep Timer.
Additional Warnings
• The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on apparatus.
• Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid
damaging the surface. Use a protective barrier between the unit and surface to
protect the surface.
• Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
• Completely replace all old batteries with new ones.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.
Mem/Clock
With the Radio on, press it and TUN +/-
press to play or pause media from the speaker.
Press to pair
Bluetooth devices
to the unit.
Volume +/- /al1/al2
Press to adjust the volume, or
to set Alarm 1 or Alarm 2.
removable Back Stand
Pair
Speaker

Advertisement

loading

Related Manuals for iLive ICB284

Summary of Contents for iLive ICB284

  • Page 1: Fcc Warnings

    Bluetooth Speaker with Clock User’s Guide for Model No. ICB284 v1019-01 FCC Warnings Additional Warnings Warning: Changes or modifications to this unit not expressly approved by the party • The apparatus shall not be exposed to dripping or splashing and that no objects filled responsible for compliance could void the user’s authority to operate the equipment.

  • Page 2: Battery Backup/Power

    Battery Backup The battery backup is intended for short power outages only. The clock radio’s primary functions cannot run off of the battery backup alone. Requires 2, AAA-size, batteries (not included). Bottom View Power Plug the AC/DC power adapter (included) into the DC Power input on the unit, and a standard power outlet.

  • Page 3: Setting The Clock

    2. Press the Pair button. The blue light will begin to flash quickly. 3. Using the native controls on your Bluetooth device, scan for and select iCB284 in your Bluetooth settings to pair. 4. If your device requests a password, enter 0 0 0 0.

  • Page 4: Sleep Timer

    alarM Setting Alarm 1/Alarm 2 1. With the radio off, press and hold the al1 or al2 buttons until the display begins flashing. Note the white indicator light above the display. 2. Press the tun ± buttons to select bb (buzzer) or Fr7 (radio) on the display. 3.