Related Manuals for MTX MUD6SPBT Thunder Sports
Summary of Contents for MTX MUD6SPBT Thunder Sports
- Page 1 MUTE – SOURCE MUTE – SOURCE MUTE – SOURCE OWNER’S MANUAL MUD6SPBT UNIVERSAL BLUETOOTH SOUND BAR Near Field Communication M T X . C O M...
-
Page 2: Important Notice
IMPORTANT NOTICE If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support at 1-800-225-5689. When connecting power and ground wires ensure that the red power wire is fused at the point where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the product. -
Page 3: Electrical Operation
2. Select Bluetooth by tapping the Power button until it blinks Blue. 3. Select “MTX Sound Bar” from the menu on your Bluetooth enabled device. The unit will power on in Bluetooth mode first when it is turned on by tapping. If the accessory wire is disconnected, (vehicle is turned off and then turned on) the unit will revert back to the previous Bluetooth or AUX setting. -
Page 4: Installation
INSTALLATION The MUD6SPBT can be used with any 12-volt battery and can be mounted to a variety of bars using the included hardware. The unit has three wires in its wiring pigtail. The red wire, hot, should be directly connected to the vehicles positive battery terminal, the black wire, ground, should be connected directly to the vehicle’s chassis where paint has been removed or the negative terminal on the battery, and the blue wire, accessory, should be connected to the ignition wire on the vehicle. - Page 5 NOTES: M T X . C O M...
- Page 6 NOTES: M T X . C O M...
- Page 7 NOTES: M T X . C O M...
- Page 8 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation © 2015 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek Corporation. Designed and Engineered in the U.S.A.