I/O Levels - Acuma Labs De-Esser User Manual

I/O Levels

DSR-1 I/O Levels
IN/OUT
The input and output meters are located at the far-left side.
These meters represent the incoming signal and the output (post
effect) signal.
OL
OL (overload) is represented by the two small boxes above the
in/out meters. The left-most overload indicator is for input level,
and the other one is for output. They flash red if overload is
occurring.
INPUT
The INPUT knob determines the gain or attenuation that is
applied to the input signal.
11
User's Guide