MULTS AND "Y"s
A mult or "Y" connector allows you to route one
output to two or more inputs by simply providing
parallel wiring connections. You can make "Y"s
and mults for the outputs of both unbalanced and
balanced circuits.
Remember: Only mult
or "Y" an output into sev-
eral inputs. If you need
to combine several out-
puts into one input, you
must use a mixer, not a mult or a "Y."
RING (RETURN)
TIP (SEND)
RING (IN)
FROM
PROCESSOR
OUTPUT
TO
PROCESSOR
INPUT
Y-cord insert cable
Y-cord splitter cable
RING
TIP
(RETURN)
(SEND)
TIP (OUT)
TO MIXER
CHANNEL INSERT
35