TP-Link Archer T8E User Manual page 35

Archer T8E/Archer T9E

Note:
You will see Figure 4-2 if you selected the security type WPA-PSK/WPA2-PSK; while, if
you selected the security type WPA/WPA2, Figure 4-3 will be displayed.
Encryption Type: From the drop-down menu, select the encryption type that is the same

as on your Router or access point.
Security Key: Enter the passphrase exactly as it is on your wireless Router or access

point. Click the Show characters box to see the passphrase, or uncheck this box to hide it.
Authentication: Select a type of authentication, either certificate or password.

Certificate: If you select certificate as your Authentication, then you need to specify your

certificate from the drop-down list here.
Start this connection automatically: Check this box to automatically connect to this

network next time.
Save: Click Save to save your settings.

Having completed the above settings, the Profile page should look like the following figure. To
connect to a desired network, just highlight the network you would like to connect to and click
the Connect button on the bottom of the window. Then click OK in Figure 4-5 to activate the
profile.
AC1750/AC1900 Wireless Dual Band PCI Express Adapter User Guide
Figure 4-4
Figure 4-5
27