Insignia NS-P16AT08 User Manual page 65

Insignia NS-P16AT08/NS-P16AT10 8"/10.1" Wi-Fi Android™ Tablet
These FCC RF exposure limits are derived from the recommendations of two
expert organizations: The National Council on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and Electronics Engineers
(IEEE). In both cases, the recommendations were developed by scientific and
engineering experts drawn from industry, government, and academia after
extensive reviews of the scientific literature related to the biological effects of RF
energy.
The RF exposure limit set by the FCC for wireless mobile devices employs a unit
of measurement known as the Specific Absorption Rate (SAR). The SAR is a
measure of the rate of absorption of RF energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC requires wireless devices to comply
with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC SAR limit incorporates a substantial margin of safety to give additional
protection to the public and to account for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the mobile device transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the mobile device while operating can be well below
the maximum reported value. This is because the mobile device is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the
lower the power output of the mobile device.
Before a new model mobile device is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the SAR limit established by
the FCC. Tests for each model mobile device are performed in positions and
locations (e.g. near the body) as required by the FCC.
By typical operations, this mobile device has been tested and meets FCC SAR
guidelines.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines. The FCC has granted an Equipment Authorization for this mobile
device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines.
SAR information on this and other model mobile devices can be accessed online
on the FCC's website through http://transition.fcc.gov/oet/rfsafety/sar.html. To find
information that pertains to a particular model mobile device, this site uses the
mobile device FCC ID number, which is usually printed somewhere on the case of
the mobile device.
www.insigniaproducts.com
65