Web Interface - Atlantis Land DiskMaster NAS G303S Quick Start Manual

including the password.
2 Before you configure this device you need to know the following
default settings:




3 It is highly recommended to change the default username and
password. Make sure you store the username and password in a
save place.
A.3 WEB Interface
I cannot access the web configurator.
Steps
1 Make sure you are using Internet Explorer 7.0 and later versions.
2 Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the
Delete Files ... button.
When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the version of
your Internet browser.)
E.G. Internet Explorer 7 (Tools->Internet Options->Advanced-
>Reset).
I cannot access the web configurator.
Steps
1 Check Link LED (green).
2 Make sure you are using the correct IP address of the Disk Master.
3 Found the new IP address of the Disk Master with Utility.
4 Reset the device.
Username: admin
Password: atlantis
IP address: by DHCP, (If a DHCP server isn't available in
the network, the Disk Master will use 192.168.1.1 and
Subnet Mask 255.255.255.0).
Server name: Disk Master
Corrective Action
Corrective Action
49