Advertisement
LIMITED WARRANTY
LIMITED WARRANTY SISCO warrants the cutting blades of the machine to
be free from defects in material and workmanship for 3 years from the date
of purchase by the original consumer. SISCO warrants all other parts of the
machine to be free of defects in material and workmanship for 1 year from
the date of purchase by the original consumer. If any part is found to be
defective during the warranty period, your sole and exclusive remedy will be
repair or replacement, at SISCO's option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling, or unauthorized
repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED IN
DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH
ABOVE. In no event shall SISCO be liable for any consequential or incidental
damages attributable to this product. This warranty gives you specific legal
rights. The duration, terms and conditions of this warranty are valid worldwide,
except where different limitations, restrictions, or conditions may be
required by law.
For more details or to obtain service under this warranty, please contact us
or your dealer.
SISCO
ATTN: Customer Service
2835 East Ana Street
Rancho Dominguez, CA 90221-5601
1-800-223-8566
e-mail: customerservice@siscoproducts.com
www.siscoproducts.com
Following items included
with shredder:
• Wastebasket
• Instruction manual
SHREDDER
Instruction Manual
PRODUCT SPECIFICATIONS
Model SC081BP CROSS-CUT SHREDDER
Throat Width:
9" / 229cm
3
Shred Width:
/
Sheet Capacity:
8 sheets
Power:
120v / 60hz
Certification:
UL Listed
Model SC101BP CROSS-CUT SHREDDER
Throat Width:
9" / 229cm
3
Shred Width:
/
Sheet Capacity:
10 sheets
Power:
120v / 60hz
Certification:
UL Listed
7
" x 1
/
" / 4mm x 50mm
8
8
7
" x 1
/
" / 4mm x 50mm
8
8
English 01
Models SC081BP / SC101BP
Advertisement
Table of Contents
Summary of Contents for Protector SC081BP
-
Page 1: Limited Warranty
PRODUCT SPECIFICATIONS LIMITED WARRANTY SISCO warrants the cutting blades of the machine to Model SC081BP CROSS-CUT SHREDDER be free from defects in material and workmanship for 3 years from the date of purchase by the original consumer. SISCO warrants all other parts of the Throat Width: 9”... - Page 2 To protect the shredder from damage, the built-in overload sheets of paper for the first few shredding cycles. This will allow protector will stop the shredder. The normal duty cycle for continuous the internal lubrication to be equally redistributed to all the shredding at maximum capacity is 3 minutes on and approximately moving parts in the cutter assembly.
Need help?
Do you have a question about the SC081BP and is the answer not in the manual?
Questions and answers