M.E.Y. Equipment 991101 Parts Manual

28" Twin Clutch Mower
Early model prior to 991101
Note the distinctive different style of side handles

PICKING THE CORRECT PARTS:

• Serial number is located on the aluminium manufacturer's tag
but is also stamped into the front steel cross rail on the chaincase
side. The first two numbers are the year and second two numbers
are the month of manufacture. E.g. Serial No 991101 was the first
mower made in November 1999.
• Single clutch models can use the same parts drawing.
• Cylinder chain lengths for models prior to 991101 varied over the
life of the cylinder. Order a long cylinder chain and a half link so
that the length can be adjusted to suit your mower.
• Clutch and Drive shafts should be measured and the overall
length checked when ordering by part number.
• Female clutch cones are normally 25mm but at times 1" bore was
used due to engine shortages. Check bore before ordering.
200 Collier Rd, Bayswater, Western Australia 6053. Tel 08 9370 1110 Fax 08 9370 2566
Current model 991101 onwards
www.mey.com.au
sales@mey.com.au