JJ Cole Collections Broadway S630 Instruction Manual page 12

Section 5 - Stroller Operation and Use - Continued
15. To attach the Chicco infant car seat:
A . Remove toddler seat by lifting up on the seat
by pressing down on the release latches
B. Locate the infant car seat adapter and rotate
arms until they lock into place.
Note: To fold up infant car seat adapter, push release
1
button and rotate arm
Repeat for other side.
C. Lower the infant car seat adapter onto the hinges
until it clicks.
Note: Pull up on the infant car seat adapter to
ensure it is attached.
To remove infant car seat adapter
1
Press release tab and pull up adapter
21
.
2
up.
2
.
Section 5 - Stroller Operation and Use - Continued
D. Lower the Chicco infant car seat into the infant car
seat adapter until it clicks.
Note: Pull up on the Chicco infant car seat to
ensure it is attached.
E. Route buckle webbing through the belt path on
both sides of the infant car seat
buckle
seat is held tightly.
2
1
16. To remove the Chicco infant car seat:
A. Unbuckle the webbing strap over the infant car
seat. Pull release handle
car seat. Pull up on infant car seat
remove.
Use only the following Chicco infant car seats with the infant
2
car seat adapter:
• Chicco KeyFit
1
• Chicco KeyFit
1
. Attach the
2 3
. Tighten strap so that the infant car
1
on back of infant
2
to
WARNING
™
30
™
3
2
1
2
1
22