Do you have a question about the VoiceWave and is the answer not in the manual?
Questions and answers
Summary of Contents for PhoneTree VoiceWave
Page 1
™ GETTING STARTED guide VoiceWave Premium ™...
Page 2
User Guide CD Hardware Power Adapter USB Cable PhoneTree Hardware Duplex Adapter & Vertical Stand Short Phone Cable Long Phone Cable Headset Microphone If you are missing any of the above items, please contact PhoneTree Customer Support at 800.555.0559 or support@phonetree.com.
This guide will assist you with installing the PhoneTree VoiceWave Premium system on your computer. Once you have completed steps 1-5, please refer to the VoiceWave Series User Guide CD to complete the system’s configurations. Install the Software Note: Before installing the VoiceWave Premium software, ensure the intended Windows operating ®...
Slide the Vertical Stand into the bottom groove of the PhoneTree unit until it snaps into place. b. Connect the square end of the USB Cable to the PhoneTree unit and the flat end to an available USB port on your computer.
Page 5
The PhoneTree unit’s single phone jack design allows it to be used as a 1 or 2-line system, based on the number of lines you Connect Analog purchased. Use the examples below to connect the PhoneTree unit to your wall jack.
Page 6
Once the PhoneTree hardware has been connected to your computer, Microsoft Windows may prompt you for permission Install the to install the PhoneTree unit’s hardware drivers. These drivers are necessary for operation and are 100% safe to install on Hardware Drivers your computer.
Repeat steps d-f for each additional line. What To Do Next: Once you’ve completed steps 1-5, please refer to the VoiceWave Series User Guide CD to start the necessary configurations for your system. If you have any questions along the way, feel free to contact our Customer Support team for assistance at 800.555.0559 or support@phonetree.com.
Need help?
Do you have a question about the VoiceWave and is the answer not in the manual?
Questions and answers