Glen Dimplex Home Appliances Ltd UWM60 User Manual page 11

B. Install the Oven
ADJUST SCREW A
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then
install the oven into the cabinet.
Adjust the height of ADJUST SCREW A to keep 1mm gap between the
ADJUST SCREW A and the top plane of cabinet.
Do not trap or kink the power cord.
Make sure that the oven is installed in the center of the cabinet.
SCREW B
2. Open the door; fix the oven to the cabinet with SCREW B at the
INSTALLATION HOLE of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER
to the INSTALLATION HOLE.
UPPER AIR TUNNEL
TRIM-KIT
INSTALLATION HOLE
TRIM-KIT PLASTIC COVER
11
ADJUST HEIGHT
ADJUST SCREW A
TRIM KIT
INSTALLATION HOLE