Summary of Contents for Telematic PreView Top
- Page 1 USERS MANU USERS MANU USERS MANU AL USERS MANU USERS MANU PreView Top...
- Page 3 Connecting 1 Insert 4 alcaline AAA batteries. Unscrew the screw securing the battery door, open the door as the arrows indicate. 2 The coiled cord should be connected to this jack and to the handset. 3 The line cord should be connected to this jack. 4 Select ringer volume OFF - LOW - HIGH.
-
Page 5: Wall Mounting
Overview 1. Handset hook Take out and rotate 180° to get a hook if you wall mount the phone. 2. Hook knob 3. LED Flashes for new calls. 4. LCD 5. RADERA Delete button, also used to confirm settings. 6. Scrollkeys Used to scroll memory and select value in settings. - Page 6 PreDial You can dial the number before lifting the handset. If you need to edit the number you key in, you can use RADERA to delete the last digit. Just lift the handset to dial out the shown number. TELESVAR calls must be done off hook (no Predial). SENASTE SENASTE-key is used to scroll the 12 latest calls.
-
Page 7: Call Duration Timer
REDIAL Lif the hanset and press SENASTE. If the calling line is busy, you can just press SENASTE again. You don’t have to hang up, PreView Top handles the disconnection and connection to get a new dialtone. Call Duration Timer For outgoing calls, the call duraton timer will start about 6s after the last digit in the phone number is dialled. - Page 8 SETTINGS Hold both scroll keys down at the 6 sec same time for about 6 sec. until “SVENSKA” is shown on the display to enter setting mode. Release the two keys. Note! The line must be connected to the phone and handset on the hook.
- Page 9 SPRÅK Select language. REPEAT Select REPEAT AV (off) or PÅ (on). The functions is if repeated receptions of the same CID number will occupy a new memory location (REPEAT AV) or if a repeated number only will update the same number location (REPEAT PÅ).
- Page 10 Use the scroll key to scroll the CID memory. Use R key to go back directly to stand by mode. You need to subscribe to the CID service in order to receive the callers number. Call Telia 90200 and ask for Nummerpresentation.
- Page 11 The Display Stand-by 1. Phone symbol. Handset on hook if the line is free. Lifted hanset if the line is occupied. 2. Time and date (running) 3. Total count of CID memory. 4. Total count of CID memory. 5. Count of NEW numbers in CID memory.
- Page 12 Phone book STORE 1. Enter the number you want to store (on hook). 2. Hold the NAMN key down until the LED is turned on (there must be a number on the display). A marker starts to flash at the first position for the name.
- Page 13 Memory M1 - M3 STORE 1. Enter the number you want to store (on hook). 2. Hold the target memory key (M1 - M3) down until the LED is turned on. Maximum 18 digits could be stored in each memory key. Use SENASTE-key to get a pause in a number..
- Page 14 2. Press one of the scroll keys (to enter CID scroll mode). 3. Step to wanted contrast by pressing the # key. Telia TeleSvar PreView Top have special function keys used for Telia TeleSvar. Retrieve messages 1. Lift the handset 2.
-
Page 15: Troubleshooting
Care PreView Top should only be used indoors and at normal indoor temprature. Use only dry cloth. Aviod direct sunlight. Trouble shooting For support, call 031-887598 Check all connections Check batteries and that the batteries are corcctly inserted and with the right polarity.
Need help?
Do you have a question about the PreView Top and is the answer not in the manual?
Questions and answers