AMT FS-2MIDI User Manual

Safety rules
CAUTION!
The unit contains no user-serviceable parts. Only qualified
professionals can carry out repair of the device.
WARNING! To avoid malfunctions, the device must not be exposed to rain or
moisture. The device interior must not be exposed to water or other liquid. Do not
place containers filled with liquids, such as vases, etc. on top of the device.
This symbol indicates important information about the
operation of the device and its servicing as reflected in the
accompanying documentation.
Please read the instruction manual carefully.
1. Keep the instruction manual at hand.
2. Please pay attention to the warning signs.
3. Do not forget to follow all the instructions contained in the
manual.
4. Before cleaning the device unplug it from the power adapter.
Use only dry cloth to clean the device.
5. Do not place the device near heat sources; avoid direct
sunlight.
6. Lay the mains cord in such a way that it is not stepped upon.
Make sure it is not in contact with sharp angles etc. If the
mains plug or the socket of the adapter is used to switch the
device off, they must be easily accessible.
7. Use only auxiliary devices and accessories recommended by
the manufacturer.
8. Disconnect the device from the power adapter (when using
power adapter) during thunderstorm.
9. All works, related to the device repair must be carried out only
by qualified service personnel.
10. WARNING! All service instructions are intended exclusively for
qualified personnel. Do not carry out any repairs not described
in the instruction manual. The repair works must be carried out
only by qualified specialists.
Contents
www.amtelectronics.com
1
Important instructions
Complete set
Introduction
Before you start
Specifications
Controls
Top panel
Only for qualified personnel
Basic operation of AMT FS-2MIDI
Adjustable parameters
AMT FS-2MIDI operation description
CONTROL INPUT
Factory settings restoration
Connection to external devices
Variants of connections to external devices
Adjustments algorithms of FS-2MIDI
Operational modes
MIDI-commands
What's new in hardware version 1.11
IMPORTANT INSTRUCTIONS!
THE FAILURE TO OBSERVE THE FOLLOWING INSTRUCTIONS
MIGHT RESULT IN YOUR DEVICE DAMAGE. THE GUARANTEE IS
VOID IF THESE INSTRUCTIONS ARE NOT FOLLOWED.
Ø
After transportation or storage of the device under low
temperatures keep the device inside its original packaging
under the room temperature for AT LEAST 2 HOURS before
using it!
Ø
To connect FS-2MIDI footswitch (further on FS-2MIDI) to
other devices use exclusively the cables intended for such
connections.
Ø
DO NOT use other types of cables e.g. speaker cables and
so on.
CONNECTION of FS-2MIDI to power adapter:
Ø
The connection is to be made ONLY AFTER all other
connections have been completed!
Ø
Before connecting FS-2MIDI to the power adapter make
sure that the housing, the cable and the mains plug of the
power adapter are intact: no cuts, cracks, dents etc. and
are in operative condition.
Ø
In order to connect FS-2MIDI to the power adapter first
insert the power adapter low-voltage connector to the
corresponding socket on the rear panel of FS_2MIDI and
then insert the power adapter's plug into the mains.
DISCONNECTION of FS-2MIDI from power adapter:
Ø
To disconnect FS-2MIDI from the power adapter first
disconnect the power adapter's plug from the mains and
then disconnect its low-voltage connector from the socket
on the rear panel of the device.
COMPLETE SET
The complete set includes:
1.
FS-2MIDI
2.
Instruction manual
3.
Packaging box
4. Warranty card
www.amtelectronics.com
1
1
2
2
2
2
2
2
3
3
3
3
3
3
3
4
4
4
5
1
1
1
1
1