Advertisement
TBXPAL
Remote Operation (1)
To prevent battery leakage which may result in
bodily injury or damage to the remote:
1. Install all batteries correctly, + and – as
marked on the remote control.
2. Do not mix batteries:(OLD and NEW or
CARBON and ALKALINE, etc.)
3. Remove batteries when the remote is not
used for a long time.
Notes:
1. Some buttons on remote have two functions (for TV & DVD mode). When press the TV button, the remote will get in TV function mode,
each time when press the TV function button, the LED will flash "RED" light. When in DVD mode, each time when press the DVD
function button, the LED will flash "GREEN" light.
2. Some of buttons are designed for operating single disc DVD player, pls read the DVD manual to operate the DVD player
1
TV Mode
Button
Function
1. POWER
Power On/Off
3. A/P (AUTO PROGRAM)
Channel Scanning
4. / 5./ 14./ 16. ( ▲ ◄ ► ▼) Up/Down/Left/Right
6. CH (+/-)
Channel Up/Down
7. 1/2/3/4/5/6/7/8/9/0
Numbers
TV Mode – Red Flash
8. LED
DVD Mode – Green Flash
9. TV
TV Mode Selected
11. MUTE (TV)
Mutes Audio
12. MENU
OSD Menu for TV setting
13. ENTER
Select Input
15. VOLUME (+/-)
Audio Increase/Decrease
17. RECALL
Channel Return
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ASA Electronics Universal Remote
- Page 1 TBXPAL Remote Operation (1) To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, + and – as marked on the remote control. 2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc.) 3.
- Page 2 Remote Operation (2) Button Descriptions Included Remote 1. Press “MENU” to activate the OSD menu. MENU 2. Press again to navigate TUNER MODE (RF input mode) AUDIO OUTPUT (audio output mode) CHANNEL SKIP (channel skip mode) RESET:(restore to factory default value) 3.
-
Page 3: Basic Operations
Basic Operations 1. Power TBXPAL On Feed the “+12VDC” power supply to TBXPAL’s “POWER INPUT” socket. 2. Set TV source to A/V input Scan Channels and Auto-programming Press the [ A /P ] button on the remote. will scan all channels in the “AIR” and “CATV” modes and memorize Tuner channels with PAL TV signal in the modes... - Page 4 Item Function AUDIO-LEFT OUTPUT (RCA) AUDIO-RIGHT OUTPUT (RCA) VIDEO OUTPUT (RCA) EXTERNAL REMOTE INPUT TV ANTENNA INPUT (IEC 169-2) POWER INPUT Specification Composition Video Output 1 Vp-p @ 75 ohm Audio Output 0.5 Vp-p @ 10K ohm RF Input Socket IEC 169-2 TV System PAL B/G, D/K, I...
Need help?
Do you have a question about the Universal Remote and is the answer not in the manual?
Questions and answers