Framers Corner C330 Operating Instructions

C330 Canvas Stapler
Parts List
No. Description
Qty
No. Description
Qty
1 Hex Bolt M5X8 l 28 Trigger Valve Head 1
2 Washer 5 l 29 Trigger Valve Stem 1
3 Exhaust Cover l 30 O-Ring 1.2X1.9
4 O-Ring 26.2X2.5 31 O-Ring 11.2X1.9 1
5 Hex Bolt M5X20 32 Trigger Valve Guide 1
6 Cylinder Cap l 33 Compression Spring 1
7 Cylinder Cap Gasket l 34 Trigger Lock 1
8 Shim l 35 Trigger Body 1
9 Compression Spring l 36 Step Pin 3X14.8 1
10 O-Ring 11.7X2.5 l 37 Washer 5
11 Head Valve Piston l 38 Driver Guide 1
12 O-Ring 21.3X3 l 39 Fixed Magazine 1
13 O-Ring 10X3.5 l 40 Spacer 1
14 O-Ring 31.3X2.5 l 41 Mobile Magazine 1
15 Support Collar l 42 Nail Pusher 1
16 O-Ring 17.3X3 l 43 Compression Spring 1
17 Driver l 44 Spring Guide 1
18 Cylinder l 45 Hex Bolt M4X6 1
19 O-Ring 24.5X2 l 46 Stopper 1
20 Bumper l 47 Torsion Spring 1
21 Body l 48 Step Pin 3X17.2 1
22 Rubber Grip l 49 Magazine Click Latch 1
23 O-Ring 34X3.5 l 50 Hex Bolt M5X22 1
24 End Cap l 51 Screw Nut M5 1
25 Air Plug l
26 Nozzle l
27 Seal (12.5-7-1.8) l
O n y u s e o r i g i n a l F r a m e r s C o r n e r C 3 3 0 / 6 a n d C 3 3 0 / 1 0 S t a p l e s
F
RAJMIERS
C O R N E R
Cedar Court, Walker Rd, Bardon,
Leicestershire, LE67 1TU, England
Tel +44 (0)1530 516925. Fax +44 (0)1530 516929
e-mail: sales@framerscorner.co.uk
Page 4
C330 Canvas Stapler
Operating Instructions
T e c h n i c a l D a t a
R e c o m m e n d e d O p e r a t i n g P r e s s u r e R a n g e 4 - 7 b a r
N o i s e l e v e l 8 2 d e c i b e l s
L u b r i c a n t A i r T o o l O i l
W e i g h t ( w i t h o u t f a s t e n e r s ) 0 . 8 9 K g
A i r I n l e t % " N P T
M a x i m u m P r e s s u r e 7 b a r
S t a p l e W i d t h 1 1 . 2 m m
S t a p l e l e n g t h 6 t o 1 0 m m
U s e s C 3 3 0 / 6 a n d C 3 3 0 / 1 0 S t a p l e s 0 . 7 5 m m x 0 . 5 8 m m
Safety Instructions - Things to be aware of
1. Keep children away from Air Tools and the working area. Do not let them
handle any air tool.
2. We recommend that you wear safety glasses to protect your eyes from
dust and other foreign particles.
3. Air tools can be noisy and therefore we recommend the use of ear
protection equipment.
4. Loose clothing can be dangerous. Always make sure that ties, shirts,
jackets etc. cannot get caught in the moving parts of the Air Tool.
5. Never use Oxygen or any other bottled gases as a power source. They
can cause explosions.
6. Always connect your Air Tool to the compressed air supply via a coupling
that will release all pressure from the tool when disconnected.
We recommend the use of Quick Action Couplings.
7. The C330 should be disconnected from the air supply at the
end of the job and when performing maintenance.
8. Take care not to put your hand inside the magazine or anywhere else
when connecting or disconnecting the air supply. Remove any staples from
the Magazine upon completion of the job.
10. Do not point the C330 at another person. Air Tools can be dangerous
and cause serious harm.
11. Do not immerse the C330 in cleaning fluid. Such solutions can damage
working parts.
12. Do not operate the trigger when there are no staples in the magazine
Page 1