Summary of Contents for Pelc VS5104
- Page 1 I N S T A L L A T I O N / O P E R A T I O N VS5100 Series Sequential Switcher C831M-G (8/12)
-
Page 3: Important Safety Instructions
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. - Page 4 Description The VS5100 Series sequential switchers are designed to switch four cameras (VS5104) or eight cameras (VS5108) to one monitor. MODELS VS5104 Desktop, 4-position, single output sequential switcher without alarm inputs VS5108 Desktop, 8-position, single output sequential switcher without alarm inputs...
-
Page 5: Installation
Installation The VS5104/VS5108 switcher is designed for either looping or terminating operation. The unit is shipped ready for terminating operation, but it can be modified for looping operation. Looping and terminating inputs may be mixed. 1. To install the VS5104/VS5108, do the following: Terminating operation: Proceed to step 2. -
Page 6: Operation
Single camera viewing: To continuously view from a single camera, set the channel switch for the camera to the MONITOR (up) position. MAINTENANCE Under normal operating conditions and usage, maintenance of this equipment is not necessary. The VS5104/VS5108 has no operator serviceable components and should be serviced by a trained technician or returned to the factory for repair. -
Page 7: Specifications
Aluminum, black polyester powder coat, white silkscreen Environment 0° to 49°C (32° to 120°F) Dimensions VS5104 22.38 x 14.00 x 4.50 cm (8.81" D x 5.51" W x 1.77" H) VS5108 23.50 x 21.87 x 4.50 cm (9.25" D x 8.61" W x 1.77" H) -
Page 8: Warranty
8/12 All references to obsolete models VS5104/220 and VS5108/220 were removed from manual.Updated manual to new format and revised warranty. PPelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates.