1. Manuals
  2. Brands
  3. Jasanwit Manuals
  4. DVR
  5. JW-MR-HD1231-GW045-A05
  6. User manual

Jasanwit JW-MR-HD1231-GW045-A05 User Manual

12ch full 960h hdd mobile dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
12CH Full 960H HDD Mobile DVR

User Manual

Before installing and using, be sure to read the Manual, then you will properly use and protect your machine.
The first part of the statement concerns the matters to be attention before installing and using.

Advertisement

Table of Contents
loading

Summary of Contents for Jasanwit JW-MR-HD1231-GW045-A05

  • Page 1: User Manual

    12CH Full 960H HDD Mobile DVR User Manual Before installing and using, be sure to read the Manual, then you will properly use and protect your machine. The first part of the statement concerns the matters to be attention before installing and using.
  • Page 2  Attention  To protect your rights, before using and installing, please carefully read the contents of the manual.  This product is used for car inside, in order to prevent short-circuit or the risk of electric shock, do not make the machine in the rain or humidity environment. ...

  • Page 3: Table Of Contents

    Contents Product Overview............................... 3 Basic functions................................3 Audio/Video Compression Format........................3 Audio/video recording mode..........................3 Image quality when monitoring, recording, playback..................3 Total Resources..............................4 Audio video synchronous recording......................... 4 Access detection..............................5 Signal loss alarming function..........................5 Alarm linkage..............................5 Alarm pre-recording............................5 2.10 Full duplex.................................5...

  • Page 4: Product Overview

    1 Product Overview The four-channel /eight –channel /twelve–channel embedded digital hard disk video recorder is designed for car safety. It uses embedded processor and embedded operating system, combined with video / audio compression / decompression, GPS, car recorder, and the capacity hard disk storage technology to confirm the high intelligence and high stability.

  • Page 5: Total Resources

    12 Channel 960H： 960*576 /channel  Horizontal resolution for playback 12 Channel 960H： 960*576 /channel Total Resources 12 Channel 960H：  Support 12 channels 960H (960*576) simultaneous recording, total 360fps. Support 12 channels 960H (960*576) simultaneous playback, total 360fps.  Audio video synchronous recording ...

  • Page 6: Alarm Pre-Recording

    Alarm pre-recording Alarm video mode, alarm pre - recorded more than 5 s video, audio, positioning data.  Full 2.10 duplex Under full loading status, users can index, playback the recorded data with no frame loss.  Malfunction alarming function 2.11 ...

  • Page 7: Authority, Encryption, Data Safety

    2.16 Authority, encryption, data safety Enter the DVR by password, default for “6666”. Data is stored in a special file system to ensure it’s  encrypted and safe.. 2.17 Log function  The log includes the alarming and malfunction information, stored into HDD. It can be checked via computer.

  • Page 8: Index And Playback

    3.4 Index and Playback Index and playback by time.   Support 12Channel 960H：12CH video, 1CH audio (any channel can be chosen) , index and playback at the same time, support amplifying in one channel. Data only played by DVR playback software ...

  • Page 9: Technical Parameters

    4 Technical Parameters Items Device parameters Performance index Name Product Name 12 Channel Mobile DVR(HDD Storage) Operation System Linux Operation Interface Graphical Interfaces, Chinese/English optional System File System Proprietary Format System Privileges User Password Video Input 12ch Independent Input: 1.0Vp-p，75Ω.Both B&W and Color Cameras Video Output 1 Channel PAL/NTSC Output, 1.0Vp-p，75Ω，...

  • Page 10: Instruction Of Installation

    Power Consumption ≤ DC8-36V 5% Others Working Temperature ≤80% -20℃ ~ +85℃ Clock Built-In Clock, Calendar Product Size 245(L)*190(W)*71(H)mm（with Holder） Product Weight 3.4KG(without HDD) Package Each In a Box, 5 set/Canton Packaging Box Size 245(L)*190(W)* 71(H)mm Carton Size 650(L)*375(W)* 255(H)mm Carton Weight 14kgs/ 18kgs (without HDD) 5 Instruction of Installation...

  • Page 11: Instruction Of Hdd Installation

    Remarks:  If the power supply is 12V, then the current of 12V output can be just 1A. So if there are more than 3pcs cameras, we suggest customers to get power for other cameras from the 12V vehicle power directly or use Our special car power supply.
  • Page 12 Make sure whether power switch is turned on or turned off, if it is turned on, please use the key, turn the indentation on the “turn off” position.  Pull the front panel of the hard drive box. Carry out the hard drive and drop it on the table. Set down the two screws of the hard drive by cross-screwdriver.

  • Page 13: Instruction Of Using

     Put the hard drive in the hard drive box. The obligate line of hard drive needs longer, the line of hard drive needs to lie on the right position.  Let the four white screws of the machine through the center hole of the four shockproof rubber pads.

  • Page 14: Instruction Of Remote Control Operation

     PWR LED: lighting while work starts. Power LED on.   RUN INDICATOR: flashing when machine work well  HDD INDICATOR: record, play, backup data flashing  3G INDICATOR: When with 3G or WIFI module, or with LINK, this led will be on if the settings are all right and the network connects well ...
  • Page 15  ：For playback on the mobile DVR  : ①Stop when record and playback; ②Delete key  ：Pause/Play when playback  ：Into PTZ control mode.  ：Mute key, to turn on or turn off audio output when playback videos with audio.(The audio input of the playback device must be connected to the audio output of the DVR.) ...

  • Page 16: Menu Setting Instruction

    : ①screen zoom the fifth channel video when surveillance, record and playback  ②Enter password or set system password. : ①screen zoom the sixth channel video when surveillance, record and playback  ②Enter password or set system password.  : ①screen zoom the seventh channel video when surveillance, record and playback ②...
  • Page 17 then press“ ”to enter the main menu interface; There are "System"、"Disk"、"Record"、"Playback"、"Network" and "Alarm"options, select the option by pressing these buttons" " ,then press " "to enter. Basic Settings: includes options of “system setting”, “PTZ setting” ,”system info”, “vehicle info”. . ...
  • Page 18  Setup: Set the System time, Car Number, TV system, Language，etc.  Date format: Offer 3 display methods like “y/m/d, m/d/y, d/m/y” for personal habit. Daylight saving time: suitable for according countries or areas.   Date: Adjust the date of HDD recorder Time: Adjust the time of HDD recorder ...
  • Page 19  PTZ settings: Adjust and control the camera with external PTZ device.  Protocols: default PELCO-D, support PELCO-D.PELCO-  Bit rate: under RS485 port: 2400bps,4800bps,9600bps,38400bps,57600bps  Channel-Address: Channel one-Device address  Channe2-Address: Channel two-Device address  Channe3-Address: Channel three-Device address ...
  • Page 20  Select “Reset CFG”，there is a Reset interface after press“ ”,confirm to Reset ,cancel to return the original interface.  Car information: details of car plate number, route and driver code. Car plate number: can be showed by English, Chinese simplified language, Numbers or ...
  • Page 21 accelerated speed value is changeable)  GSensor-Y：0000mg(default value, this value will change accordingly if the Y direction gravity accelerated speed value changeable )  GSensor-Z：0000mg(default value, this value will change accordingly if the Z direction gravity accelerated speed value is changeable) ...
  • Page 22 Record: the video files setting   Channel: select the channel setting (the information of each channel could be set independently)  Resolution：CIF/HD1/D1； The left side is the local storage information, The right side is network transmission information; local “CIF,HD1,D1”is optional, only “CIF” for network transmission ...
  • Page 23 The operating method is similar to the "basic settings" operating  Playback: the recorded video Playback There are video date in the menu, it will display the vide time after enter the date, choose the playback time range as needed, press “Play” or click the interface “Playback “button to replay the video. Said is power outage file suffix "_P", suffix "_S"...
  • Page 24  LAN: connecting via RJ45  3G: insert 3G SIM card into the slot  WIFI: connecting the network of WIFI  Local Network Setting（LAN） ： Network Type: LAN / 3G-WIFI optional   DHCP: Automatically get the IP address( in order not conflict with the LAN, pls enable ON, and also enable DHCP on the router, P.S, only one DHCP server can be enable in one LAN) ...
  • Page 25  Access into “Network”→”3G”  APN: Access Point Name Dialup Num: Get this info from your carrier   User Name: Fill in if you have Password: Fill in if you have  Note: Pls make sure you select the proper SIM card fit for 3G module. Here is a example for Chinese carrier.
  • Page 26  Access Network setup →“WIFI”  SSID: WIFI router device name. Password: using password for SSID   Certificate: Support both “WPA-PSK” and “WPA2-PSK” Encryption: Support both “CCMP” and ”TKIP”   Access router, check its “WIFI “encryption. Notes: Pls make sure the router WIFI encryption keep the same with the setup in MDVR if the units use WIFI.
  • Page 27  Alarm ：  Alarm REC：Alarm-triggered video duration （30-330s optional，30s unit）  Positioning Interval：GPS Data upload interval, used with other system interface Alarm out： Alarm output time (5s-900s)   Over speed：Set the over speed alarm value Motion Detect： Open and close motion detect record and motion detect sensitivity selection such ...

  • Page 28: Dvr Video Playback Instruction

    White blank：no record Red blank：record S blank：Alarm record If the record mode set to“continuous recording”or alarm recording”,the remote control stop key “ ”will not work. DVR Video Playback Instruction Enter the main menu,move to“search/playback”option ,press“ ”to enter,next press the key“ ”or“...

  • Page 29: Video Backup

    Video Backup Our company System support 2 video backup ways. Connect the USB disk to the DVR’s USB port for backup（Ports on Demand） ；Operating method as follows：...

  • Page 30: Ptz Control

     Connect USB disk to the DVR’s USB port ( FAT32 format, backup Max.20G)； On the video playback interface,select the backup video files first,then move to“backup”option,and  press “OK”to backup, “COPY END”display after backup finished,the USB disk could be taken away,then press”...

  • Page 31: Video Data Volume

    Video Data Volume The required volumes of video and video-related settings ，please see the following table： 12CH 960H VIDEO QUALITY Total Record Frame Data Size Per Hour 2.0 Mbps 300 frame 10.8GB 1.5 Mbps 300 frame 7.95GB 1.2 Mbps 300 frame 6.3 GB 1.0 Mbps 300 frame...
  • Page 32  Access into “Program”→”Run”→”CMD”, fill in “ipconfig”→”Enter” to see if the server IP has been set successfully. Open the file of “DVR_Server.cfg” in the server installation path, can check whether the ports have  been set successfully. Port: 8001, 9001, 8101 ...
  • Page 33 Add the ports of 8001, 8101, 9001 to the port forwarding.  Name: fill in a name for MDVR port. Ports to Open: 8001, 8101, 9001...
  • Page 34 IP Address: Server IP address Inbound Filter：TCP、UDP、Allow ALL, Pls select “Allow All” Schedule：select “Always”  Fill in the ports, and click” Save settings”. After the port mapping settings, find the “IP Address” in the WAN, the IP Address is your CMS server ...

  • Page 35: Domain Binding Setting

    access into WAN IP.  Change the Server IP to the related one, Access into MDVR “menu”→”Network setting”→”LAN”→”Server IP”→XXX.XXX.XXX.XXX Domain binding setting After finished the server set up and the port mapping, you can login via network IP. There are two ways to access the network as follow. ADSL dial-up: It will assign a different dynamic IP address for each dial Leased line: It will assign a static IP address, and you can access directly So, when set up the server with the way of ADSL dial-up, you can binding DDNS via domain in order to...
  • Page 36 Enable Dynamic DNS：Enable ON if you need to use DDNS Server Address: Fill in accordingly Username or Key: Fill in applied user name Password or Key: Fill in password Verify Password or Key: confirm the password Timeout:Timeout setting Status: Status of connection Notes: DDNS need to be applied by customers if necessary.

Table of Contents