S.Coifman Movement Caliber 1069 Instruction Manual page 45

Movement Caliber : 8040.N
CALIBRATION
Adjusting the Chronograph Hands to Zero Position
Example:
One or several chronograph hands are not in their correct zero position
and have to be adjusted
(e.g. following a battery change)
Pull out the crown to position 3
➊
(all 3 chronograph hands are in their correct or incorrect zero position)
Keep push-buttons A and B depressed simultaneously for at least 2
➋
seconds
(the center stop-second rotates by 360°
Adjusting the center stop second ➡ Single step A1 x short ➡ Continuous A long ➡ Adjusting the
next hand B ➡ Adjusting the 1/10 second counter hand (position 6h) ➡ Single step A1 x short ➡
Continuous A long ➡ Adjusting the next hand B ➡ Adjusting the minute counter (position 9h) ➡
Single step A1 x short ➡ Continuous A long
Returning the crown to position 1. Termination of the chronograph
➌
hands adjustment
(can be carried out at any time)
86
.
.
.
corrective mode is activated)
➡
.
7.1
A ➋
B ➋
7.2
➊
➌
7.3
87