Leader Light LL36 104 User Manual

LL STAGE WASH
Without optic: LL36 104 LL36 106 LL36 108
With optic: LL36 105 LL36 107 LL36 109
coMPLIMENTS oN yoUR PURcHASE!
All dimensions are in millimeters
600 120
following items are included:
1. Version without Vario optic
- LL STAGE WASH with adjustable bracket
- PowerCon type "A" + "B"
- User manual
2. Version with Vario optic
- LL STAGE WASH with adjustable bracket
- LL VARIO OPTIC WASH 600 25°
- PowerCon type "A" + "B"
- User manual
Additional items needed:
- Data cables with XLR 5pin Female/Male
- Controller compatible with DMX
- Mounting accessories as necessary
Surface mounting:
- Screws and washers M12 or M10
content:

01 SAfETy INfoRMATIoN

01.1 Risk of eyes damage
01.2 Protection from electric shock
01.3 Fire prevention
02 PRodUcT SPEcIfIcATIoN
02.1 Technical Specification
02.2 Back panel
03 INSTALLATIoN
03.1 Unpacking
03.2 Physical installation
03.3 Connecting to AC power
03.4 Control data connecting
03.5 DMX channels
04 MAINTENANcE
ENVIRoNMENT
Do not throw away the appliance with the normal household waste at the end
of its life, but hand it in at an official collection point for recycling. By doing
this, you help to preserve the environment.
©MMX - Leader Light – All right reserved
Leader Light s.r.o. 01 SAfETy INfoRMATIoN
M.Gorkeho 33
SK-052 01 Spisska Nova Ves
Slovakia
WARNING!!!
www.leaderlight.eu
USER MANUAL
Carefully read before installing, powering or servicing.
Nothing to do if anything misunderstand! Installation can be done only by a qualified
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
- Do not look directly into LED lamps.
- Do not look into light beam from a distance of less than 40 cm (16 inches)!
WARNING!!! AWUV versions:
Overall allowable time of exposure of unprotected eyes in relation to the distance from the
light source results:
distance (m)
max. exposure time (h:m:s)
01.2 Protection from electric shock
- Shut down power before installation or maintenance.
125
- Luminaries and recommended AC power supply must be installed by a qualified
professional in accordance with relevant local codes. Only acceptable source of AC power
and frequency that complies with local building and electrical codes to use.
- Do not use or do not connect the products if the power cable, power plug or fixtures are any
way damaged, wet, or if they are overheating.
- Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the
warranty.
- Before removing or installing any cover or part of appliance disconnect it from AC power.
1 pc.
- Appliance always connect to earth (eltech.).
1 pc.
01.3 fire prevention
1 pc.
- Follow all safety consideration.
1 pc. - Thermostatic switches or fuses never to bypass.
- Device never shield. Around the axis of the fitting (180°) must be maintained space for
1 pc.
cooling. Minimum distance from the surrounding objects must be 100mm (4 in.).
1 pc.
- LEDs never direct cover with filters or other materials.
- Allowing max. ambient temperature is 40°C (104°F).
1 pc.
- Luminaries never use without mounting brackets. The housing never install directly to the
surface.
1 pc.
1 pc.
min. 4pcs.
02 PRodUcT SPEcIfIcATIoN
02.1 Technical Specification
Lamp type:
Lifetime:
Vario optic:
control data connection:
Max. input power:
Power connection:
Net weight:
Ambient temp. (Ta):
cooling:
Materials and finish:
Installation:
*
P4: R-Red,
- UV: UV-Ultra Violet
0,6m 1,0m 2,0m
0:17:52 0:35:55 1:35:24
WARNING!!!
! !
Non-minimum distance and/or non-use
the original brackets is at your own risk!
66xRGBAW P4 * / 66xAW P4 * / 42xAW P4 * + 24xUV *
Long 50 000 hrs 70% degradation
10°, 25°, 40°, Eliptical (15°x90°) and Asymetrical
DMX 512 In/Out with XLR 5pin
RGBAW/AW:110W / AWUV:120W
100-260V AC 50-60Hz In/Out PowerCon
6kg
IP: IP20
Maximum 40°C
Conventional
Housing: powder-painted anodized aluminium in black
(other colours on request)
Surface mounting
G-Green, B-Blue, A-Amber, W-White (6300°K)
02.2 Back panel
DMX In
XLR-5pin
3,0m
DMX Out Dip options
2:43:08
XLR-5pin
control LEds Indication
LEd INdIcATIoN
POWER (Red) blinking – 2Hz
DATA (Green) light off
DATA (Green) blinking – 4Hz
DATA (Green) fast blinking
POWER (Red)
alternate blinking
DATA (Green)
03 INSTALLATIoN
03.1 Unpacking
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be claim
immediately by the transport company. Photo pictures as evidence are valuable for
future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all device
clusters (luminaries, clamps, cables, ...).
- Hairbreadth from combustible materials is 0,5m.
- Before physical installation insert the optic modul on front of luminary. The optic installa-
tion is easy and fast by 2 screws. (figures Nr. 3.1 to 3.2)
03.3 connecting to Ac power
- To tackle all Safety Information- 01!
- For protection from electric shock, the device must be grounded (earthed)!
- It is not necessary to open the fixture before power supply. Power supply is solved
simple with Neutrik PowerCon connectors.
- The fixture is equipped with auto-switching power supply that automatically adjusts to
any 50-60Hz AC power source from 100-260V.
- Cord plug connections:
Symbol
L
N
03.4 control data connecting
- Control data cable length is specified by Norm IEC929 Annex E4.
- It is not necessary to open the fixture before connecting of DMX512 control signal.
Interconnections are realized by Neutrik XLR 5pin In/Out connectors.
- Pin connections:
Pin 1 – ground
Pin 2 – signal negative
Pin 3 – signal positive
If you have any question please, contact support@leaderlight.sk
Power Out
Control LEDs
PowerCon
LL STAGE WA SH
Made in EU
Leader Light s.r.o.
PoWER dATA
Slovakia 2009
www.leaderlight.eu
sales@leaderlight.eu
MODE ADDRESS
WARNING - Disconnect
! !
mains before remove cover!
"100" "10" "1" Power In
Rotating DIP address 000÷511 PowerCon
POWER DATA
STATUS
OK - inside fixture is everything correct
NO DMX512 signal
OK- income correct DMX512 signal
NON correct digital signal
Autotest function
Pin Wire colour Screw (US)
live brown yellow or brass
neutral blue silver
ground (earth) yellow/green green