Northcom 1A3 User Manual page 4

Allows station user to generate a PBX flash or outside line recall.
If programmed for outside line recall, while connected to an outside line:
-
Press that outside line button. You will be returned to outside.dial
tone.
To exit the Night Mode (At Station 70):
-
Lift handset.
-
Press ICM button.
-
Dial # (Pound) key.
-
Dial 830.
-
Hang up. (Confirmation tone is heard).
L
The 1 A3TM can have a mix of electronic key telephones and speakerphones.
There are noticeable differences in operation when calling to a speakerphone. As
you use your telephone, you will become accustomed to the features and
shortcuts listed below.
External paging requires the use of an outside line and external paging equipment.
Making a page:
-
Lift handset.
-
Press the dedicated paging line button.
-
Make announcement.
-
Hang up to terminate.
A call to a speakerphone from a telephone with the handset lifted will
be automatically connected in the call announce mode. The intercom
call is not subject to control by the party who placed the call.
A call to a speakerphone from a telephone on-hook will tone ring and
must be manually connected for call announcing. The call is subject to
the control of the party who placed the call.
-
A call to a telephone that has call announce inhibit activated will tone
ring only.
All features mentioned below are done while handset is in the cradle (on-hook)
position. You must lift the handset to converse.
OUTSIDE
-
Press outside line button. Dial tone is suoolied. ON/OFF button is lit
As a telephone user you can inhibit the ability of other telephones to make call
announcements to you. When your telephone is instructed to inhibit call
announcements, it will allow only tone ringing.
To inhibit call announcements:
-
Lift handset.
-
Press ICM button.
-
Dial the "#" (Pound) key twice.
-
Hang up the handset. (Confirmation Tone is Heard).
To allow call announcements:
-
Lift handset.
-
Press ICM button.
-
Dial the "#" (Pound) key.
Dial the "*" (Asterisk) key.
-
Hang up the handset. (Confirmation Tone is Heard).
. .
and monitor is activated.
-
Dial desired number.
-
Lift handset to converse.
STATION SPEED DIAL
I+$) Q -
Press Station Speed button. Outside line is accessed, dial tone is
supplied and number is dialed, ON/OFF button is lit, monitor is
activated.
STATION INTERCOM
c
-
Dial Intercom number (70-81). Ringing is heard, ICM button is lit
and ON/OFF button is lit.
-
Lift handset to converse.
Allows assigned stations to ring on all incoming lines when in Night Mode.
To enter the Night .Mode (At Station 70):
STATION LAST NUMBER REDIAL
-
Press * (Asterisk) for Last Number Redial. Outside line is accessed,
. dial tone is supplied and number is dialed, ON/OFF button is lit,
monitor is activated.
-
Lift handset to converse.
,
-
Lift handset.
- Press ICM button.
-
Dial # (Pound) key.
-
Dial 831.
-
Hang up. (Confirmation tone is heard)
SYSTEM SPEED DIAL
-
Dial System Speed number (90-99). Outside line is accessed, dial
tone is supplied and number is dialed, ON/OFF button is lit,
monitor is activated.
-
Lift handset to converse.
-6-
-7-