Multilaser RE034 User Manual page 173

1.Wireless Connection in PBC Mode
1.1 Enable the router's WPS-PBC feature.
If your router provides WPS button, just press and hold it for about 1 second, then the
WPS LED will be flashing for about 2 minutes, which indicates the router's WPS feature
has been enabled. Otherwise, you can also log on to the router's web-based utility to
enable the PBC mode in WPS settings screen(For detailed settings,please refer to your
router's user guide).
1.2 Perform PBC connection on the UI of the wireless adapter
1. On the main interface of Multilaser's UI, click "Profile Settings"—"Add WPS Profile".
173