Elecom MR-SMC07 series User Manual page 2

Reading from and writing to a memory card using a PC
1
Activate the PC
1
The power of PC is turned on.
2
Insert a memory card
1
Firmly insert the memory card straight and in the correct
orientation.
1. Orient the memory card with the terminal end facing
downwards
2. Insert the memory card into the slot
3
Connect to the PC
1 2
Remove the cap from the The card reader is auto-
product, and then con- matically recognised and
nect the USB connector the connection procedure
to the PC USB port. is complete.
When using Win-
dows
tion complete" notifi-
cation will appear in
LED
the taskbar.
USB connector
* Confirm the proper up/down
orientation of the connector
when you connect it.
4
Disconnect the card reader from the PC
1
Windows
® Click the , , , or
icon in the Taskbar or
the Notification Area.
* If the icon is displayed in the
®
Notification Area in Windows
7, click it and then click the USB
icon ( ) that appears.
If using a USB device or PC card besides this
product, both names will be displayed. In this case,
click the message that appears for this product (in-
dicating a USB mass storage device or USB disc).
1
Macintosh
®
Drag the drive icon to the Trash
(Eject) and check that the drive
icon has disappeared.
The Trash i c on( ) be c omes an
Eject ( ) icon.
5
Remove the memory card
• Remove the product from the PC before removing the memory
card.
• Be sure to remove the product from the PC before shutting
down the PC.
If the PC is started with this product connected, the product may not be
recognized. If this problem occurs, remove and reconnect the product.
Memory card slot
3
Windows
® The inserted memory card can be accessed.
If an Auto Play dialog
box appears, select the
action that you want
Windows to perform.
® , an "installa-
* If the card is empty, it is
opened directly as a remov-
able disk.
3
Macintosh ®
A drive icon appears on the desktop and
you can access the memory card.
Do not remove the card reader while the LED is flashing.
2 3
Click the message The "Safe to Remove Hardware"
that appears. notification is displayed.
®
• Windows 7, Windows
Proceed to Step
• Windows Vista
C l i c k
a nd p ro c e e d to
Step
4
Disconnect the card reader from the
USB port.
When removing the product, hold the
main body and pull out the product
straight. Pulling it by the strap may result
in damage to the product and/or the PC.
1
Remove the memory card
from the slot.
When using this product with Windows
®
Windows 2000 Service Pack 4 or above is required to use
this product. Perform the following steps to confirm your
version. If using Service Pack 3 or earlier, use Windows
Update to update it to the latest version of Windows
For information on performing the update, refer to your PC
manual or consult the manufacturer of your PC.
1. Right-click the My Computer icon on your desktop,
and then click "Properties" from the menu.
The system properties window is displayed.
2. Confirm your version of Windows
Face the terminal
end downwards ®
If the Windows installed on your computer does not support USB 2.0
When performing step 2 of "2. Connect to the PC", the following
taskbar message or system notification will appear when you
connect the USB connector to the PC USB port.
• When using Windows
"HI-SPEED USB Device Plugged into non-HI-SPEED
USB Hub"
• When using Windows Vista
Pack 2 or above
"This Device Can Perform Faster"
This message is to inform you that even though this
product is a USB 2.0-compatible device, the port that it
is connected to does not support USB 2.0. In this case,
this product will operate at USB 1.1 speed, not that of
USB 2.0.
Memory card format
Memory cards that have been formatted on Windows
can also be used on Macintosh
Memory cards that have been formatted on Macintosh
® cannot be used on Windows
XP
® ®
7, Windows 2000
,
- 2 -
®
2000
®
2000.
®
2000.
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
URL: http://www.elecom.co.jp/global/
overseas@elecom.co.jp
宜麗客 （上海） 貿易有限公司
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704 号
® XP Service Pack 1 or earlier
電話 : 86-21-33680011
FAX : 86-21-64271706
URL : http://www.elecom-china.com/
ELECOM Korea Co., Ltd.
® or Windows ® XP Service
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : 1588-9514
FAX : (02)3472-5533
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
TEL : (65)-6347-7747
FAX : (65)-6753-1791
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL: 011-40574543
e-mail: support@elecom-india.com
®
URL: http://www.elecom-india.com/
®
computers.
®
USB 2.0 microSD/microSDHC Memory Card Reader/Writer
®
computers.
• This manual is copyright of ELECOM Co., Ltd.
• Unauthorised copying and/or reproducing of all or part of this
manual is prohibited.
• The specifications and appearance of this product may
be changed without prior notice for product improvement
purposes.
• ELECOM Co., Ltd. shall bear no responsibility for any and all
affects resulting from the use of this product regardless of the
above reasons.
• Export or service transaction permission under the Foreign
Exchange and Foreign Trade Control Law is required in order
to export this product or parts of this product that constitute
strategic materials or services.
• The microSD logo, and microSDHC logo are trademarks of
SD-3C, LLC.
• Windows and the Windows logo are trademarks of the
Microsoft group of companies.
• Mac and the Mac logo are trademarks of Apple Inc., registered
in the United States and other countries.
• Company names, product names, and other names in this
manual are generally trademarks or registered trademarks.
MR-SMC07 series
User's manual
1st edition, Januaryy 10, 2012
©2012 ELECOM Co., Ltd. All Rights Reserved.