Panasonic KX-TG1061 Quick Manual page 6

TG106x_QG(e).fm Page 6 Friday, December 19, 2008 2:55 PM
Quick troubleshooting
2 No dial tone is heard from handset.
See if "Check
tel
Displayed
Lift up the handset from the charger.
Press {C} at the handset, then check if the display
shows "Talk".
No link. Re-
connect base
AC adaptor.
Check if the telephone
cord is properly connected
to both the base unit and
telephone line jack on the
wall.
Still displayed
Try to connect your
telephone into a different
line.
Still displayed
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
line" is shown on the handset display.
"No
link. Re-
connect base
AC adaptor."
is displayed.
Press {s}, then check if
the dial tone is heard from
the speaker on the back.
Try remedy for 1 on
previous page.
– 6 –
Not displayed
Talk
"Talk" is displayed.
Talk
No dial tone Dial tone is heard.
Your telephone may
need service when
only back speaker
provides a dial tone.
{C}
{s}