System Setup - Nolan NMSP3C1TRX User Manual

SYSTEM SET UP
It is easy to set up the system. It needs to connect
the power, desired audio input or output, select
audio cable, the desired transmitter (Tx) or receiver
(Rx) mode and device pairing.
1. Install the power cord
2. Connect audio cable and audio input/output
2.1 Transmitter (Tx) – Connect audio input
For the transmit music/audio, connect audio
input cable RCA or AUX port between your TV,
audio source and TRX.
2.2 Receiver (Rx) – Connect audio output
For the receiving music/audio, connect audio
input cable RCA or AUX port between your
home stereo, speakers, receiver and TRX.
Important Note: The 3.5mm audio channel
always has higher priority of availability when both
3.5mm and RCA audio channels use at same
time.
DC IN