Learning Tv Remote Control Operations (Ir Learning) - Sherwood S5 Operating Instructions Manual

2
Turn on the remote repeater function by pressing and holding REMOTE REPEATER.
• When the remote repeater function is enabled and the main unit is turned on from the
standby mode, you can check the remote repeater function status by the following LED
statuses.
LED
SURROUND
Learning TV Remote Control Operations
(IR Learning)
The Remote Learning function enables you to operate the main unit with a TV remote control. You
can operate the following functions by the TV remote control.
• Turning on the main unit or turns it to the standby mode.
• Volume down
• Volume up
1
Press REMOTE LEARN.
Then the LEDs of Dolby Digital/DTS, SURROUND, and INPUT blink yellow.
REMOTE REMOTE
REPEATER LEARN
VOLUME
REMOTE REMOTE
REPEATER LEARN
Display
Blinking twice and off
No change
ON/STANDBY
SURROUND STEREO
ON/STANDBY
SURROUND STEREO
VOLUME
Description
The remote repeater is enabled.
The remote repeater is disabled.
Operation
19