Talovahti 66A User Manual

Gsm alarm system

Advertisement

Quick Links

Esteemed Guests:
Thank you for using our GSM Alarm System. For a better understanding
of this product, pls. read this user manual thoroughly before using it.
In addition , keep this instruction manual so that you may read it at anytime
when necessary
Preface
www.deltasecurity.cn
DYGSM Alarm System User Manual
Copyright:
The device is protected by patent right at home and abroad.
the Company reserves all the right to interpret.

Advertisement

Table of Contents
loading

Summary of Contents for Talovahti 66A

  • Page 1 DYGSM Alarm System User Manual Preface Copyright: Esteemed Guests: Thank you for using our GSM Alarm System. For a better understanding The device is protected by patent right at home and abroad. of this product, pls. read this user manual thoroughly before using it. the Company reserves all the right to interpret.
  • Page 2 DYGSM Alarm System User Manual Cautions To avoid personal Injury and the damage to the product, Please take the following preventive measures. 【Input voltage】 :DC12V 1A; 【Using the professional tools for Assembling to avoid the damage to the main Panel】. 【Press the touch keypad lightly】...
  • Page 3: Chapter 1: Alarm Host Diagram

    DYGSM Alarm System User Manual Chapter 1: Alarm Host Diagram www.deltasecurity.cn 【GSM Signal Indicator】 :No SIM card or searching network: flashes once every second ;GSM Signal in normal: Flashes once every 3 seconds 【RF Signal Indicator】: Flashes while sending or receiving RF signals 【LCD Screen】...
  • Page 4: Chapter 2:Operation Instructions

    DYGSM Alarm System User Manual 【Power switch】: Power on / off the back-up batteries. 【USB Slot】: For A/C adapter and upgrading system as well. 【Interface for the wired Defense Zones】:2 inputs for wired sensors.(2 Wired Defense Zones) 【Loudspeaker】. Chapter 2:Operation Instructions Note: Please follow the instructions on the LCD screen, then press the button accordingly.
  • Page 5 DYGSM Alarm System User Manual No:1 www.deltasecurity.cn No:2 Coding of Remote Controllers & Sensors/Detectors ① In Setup state→Select [Remote Controllers/Sensors] →select [ENTER] Select [Add] →Select [ENTER] ② ③ Press any button on Remote Controller or Trigger the Sensor/Detector for coding→Series Code of the sensor displays on the screen→Select [Save] ④...
  • Page 6 DYGSM Alarm System User Manual No:2 Wireless Siren Setting In Setup state→Select [Wireless Sirens] → Select [ENTER]。 ① www.deltasecurity.cn Select [Add] → Select [ENTER] ② ③ The Wireless siren will be named Sirens 1 by the Host→Select [ENTER] “Put Siren In setting Mode” displays on screen →Switch on the Wireless siren ,and then press the [add remote] on the siren. ④...
  • Page 7 DYGSM Alarm System User Manual Pair the Host with your Mobile phone Via Bluetooth ① Install the APP provided by Manufacturer (Please refer to your mobile user manual for installing) www.deltasecurity.cn ② Enabling The APP on your Mobile, input the Alarm Host information, including SIM card Number, Operation Password etc.(Please refer to the APP User Manual) ③...
  • Page 8 DYGSM Alarm System User Manual a).Works for Door Sensors Only; b).After Enabling the Function, You will have to Press & Hold the [Out Arm] or [Home Arm] button for 3 seconds to arm the system if any Door/Window is open. Otherwise, you can not Arm the system;...
  • Page 9 DYGSM Alarm System User Manual And input them into the Alarm Host. In addition, Setting up the Host to upload Alarm Data & Arm/Disarm Data is needed.Now,your Service provider can Monitor your alarm System for you. 8.1 Set up the Monitoring Center Number In set up state →...
  • Page 10: Chapter 3: Accessories

    DYGSM Alarm System User Manual 8.4 Set up to upload the Arm/Disarm Date to Service Provider In Setup State → Select [Monitoring Center] → Select [ENTER] ① Select [Upload Arm/Disarm Data] → Select [ENTER] ② www.deltasecurity.cn Select [Yes] → Select [SAVE] → “Set Successful” ③...
  • Page 11 DYGSM Alarm System User Manual Press (Arm to arm the alarm panel and the LED indicator lights on (siren hoots once), the system enters Arm state. If there comes an intruder, the siren will hoot to deter the intruder.(The siren turns off after ringing for 5 minutes as default setting.) At the same time, the system dials the pre-stored phone numbers automatically.
  • Page 12: Led Indication

    DYGSM Alarm System User Manual when a magnet mounted near the sensor is moved away. External input for wired accessory is available at the N/C interface. The tamper protection ensures that sabotage attempts to move the contact will result in an alarm activation. Appearance / PCB Layout / Installation &...
  • Page 13: Chapter4: Menu Description

    DYGSM Alarm System User Manual LED Indication Flash continuously: Under the self-testing state. Flash once: Intruder is detected. Flash twice: Self-testing is finished, enters the working mode. Normally on: Under voltage voltage indication, please change the batteries immediately. Chapter4: Menu Description MENU www.deltasecurity.cn 【Program】...
  • Page 14: Phone Numbers

    DYGSM Alarm System User Manual ………..…..【Chime Zone】: Set up “Yes” to enable the Auto Search Sensor(works for Door Sensors Only) ………..…..【Delayed Zone】: Set up “Yes” to Delay the System Alarming & Calling the preset numbers when the Sensor’s triggered ………..…..【Siren Enabled】 : Set up “Yes” to enable the siren when the sensor’s triggered 【Delete】...
  • Page 15: Monitoring Center

    DYGSM Alarm System User Manual Monitoring Center 【Monitoring Center Number】: To Edit the CID Phone Number, which will receive the information from the Alarm System upon enabling the CID Service 【ADMECO Contact id】 : User ID, Provided by your CID service provider Upload Alarm Data: To enable/Disable the Function of Uploading the Alarm Data to your Service Provider or Not 【Upload Arm/Disarm Data】: Enable/Disable the Function of Uploading the Arm/Disarm Data to your Service Provider 10.
  • Page 16: Bluetooth Address

    DYGSM Alarm System User Manual 【Format system】 :Enable [Yes] to Delete all settings. 12.3 System About 【Version】 :System Version 【Production Date】: The date of Manufacture。 【Manufacture By】 : The Manufacturer (Da Ying Inc.) 【IMEI】 : IMEI Numbers(15 Digitals) for CID Service 【BlueTooth Address】...

Table of Contents