Opel CORSA Owner's Manual page 200

198 Vehicle care
2. Unscrew both plastic securing
nuts from the inside by hand.
3. Carefully withdraw the light
assembly from the recesses and
remove.
4. Press the retaining lugs and
remove the bulb carrier from the
light assembly.
5. Remove and replace the bulb by
pushing the bulb slightly into the
socket and rotating anticlockwise:
Tail light/Brake light 1
Turn signal light 2
6. Insert and turn bulb clockwise into
the tail light assembly. Fit light
assembly with the retaining pins
into the recesses of the vehicle
body and tighten the plastic
securing nuts from inside the load
compartment.
Close cover and engage.
Reversing light/rear fog light
Left hand drive models