BMW Wallbox Pure Owner's Manual page 14

Completing the charging process
Step Procedure
1a Vehicle is connected and charging: The LED in-
dicator flashes blue.
1b Vehicle is connected and charging is complete:
The LED indicator is illuminated in solid blue.
2a Ending the charging process:
Press the Stop/Start button. The LED indicator
is illuminated in solid green. If not, please refer to
the Troubleshooting section (page 15).
Pressing the Stop/Start button again restarts the
charging process. The LED indicator flashes blue
as soon as charging actually begins.
2b Charging halted by vehicle:
The LED indicator is illuminated in solid blue.
3 Disconnect the charging cable from the vehicle:
The LED indicator is illuminated in solid blue. If
not, please refer to the Troubleshooting section
(page 15).
The connection between the vehicle plug and the vehicle is weather-proof. Therefore, when
charging is complete, you don't have to worry about disconnecting the plug in the presence of
moisture or snow.
Return the vehicle plug to the plug holder after charging to save yourself from unpleasant
bending or dirty hands the next time you charge.
14
Note
The indicator on the vehicle's charge
point flashes blue.
The indicator on the vehicle's charge
point: See vehicle's owner's manual.
The vehicle ends the charging pro-
cess: The indicator on the vehicle's
charge point is illuminated in white.
Possible reason:
- The vehicle interrupts the charging
process because a timer was pro-
grammed: The indicator on the
vehicle's charge point is illuminated in
white.
- The vehicle interrupts the charging
process because the battery is fully
charged: The indicator on the vehicle's
charge point flashes green.
To release the plug lock: Open the ve-
hicle using the remote control.