Asa electronics color ccd wide rear view camera quick start guide (1 page)
Summary of Contents for ASA Electronics AOC-75
Page 1
Observation System AOS58 AOC-75 Features High resolution, 1/3” CCD Camera Compact/Lightweight Aluminum Die Cast Body Waterproof Housing Waterproof Microphone Waterproof Normal/Mirror Image Switch Optional Wind deflector AOM-58 Features 5” Monochrome Monitor Dual camera Input Brightness/Contrast/Day-Night Controls Volume Control for Internal/External...
Page 2
This product is not intended to be a substitute for rear view mirrors, or for any other motor vehicle, or boat equipment mandated by law. FEATURES: AOC-75 CCD Camera 270,000 pixel image sensor 0.1 Lux sensitivity Automatic electronic iris provides a clearer, more consistent image in...
Page 3
This reduces the view of camera and may cause physical damage to the camera. INSTALLATION INSTRUCTIONS AOC-75 CAMERA 1. Attach camera bracket (See Figure 1) to upper portion of vehicle. Attachment point must be sturdy enough to support camera and...
2. Attach camera to bracket using 8-32 UNC screws provided. Adjust angle as indicated in Figure 2. Use rear or end of bumper as reference point. 3. Wind deflector may be installed. This deflector is designed to reduce the build-up of dust, dirt and moisture on the camera lens. (See Figure AOM-58 MONITOR 1.
Page 5
4. To increase protection of cable, place all excess wire and extension cable in convoluted tubing. 5. Do not twist camera cable, do not cut pigtail, or cable. WIRING CAMERA AND MONITOR 1. See wiring diagram for connections to ignition, ground, and backup circuit.
Page 6
“Day/Night” switch does not achieve the most desirable picture. 5. Brightness: “Day/Night” switch does not achieve the most desirable picture. 6. Volume: speaker volume. REAR OF MONITOR: See page 12. 1. Power Connection: PIN 1 not used 2. Camera A input: 3.
Page 7
3. Affix the “STOP” marker on the monitor screen over the image of the rear view bumper to locate the rear bumper. 4. The monitor screen is now “calibrated” for distances behind the vehicle of 3 feet, 6 feet and 9 feet. Camera Assembly Location, High- Camera Assembly Location...
Page 9
80° Approximately 80° Field of View Back of Vehicle, View at Monitor Screen Figure 2...
Page 10
Included Wind Deflector- Optional Installation Screw for use w/Wind deflector #8-32 x 3/8" 4mm x .7mm x 25.4mm Phillips Hex Head Screw w/Washers 4mm x .7mm Hex Nuts Screw for use Without Wind Deflector #8-32 x 5/16" 4mm x .7mm x 25.4mm Phillips Hex Head Screw w/Washers 4mm x .7mm Hex Nuts Figure 3...
Page 11
Plain Washer Spring Washer Dashboard or Overhead Steel Plate Reinforcement (Recommended for Secure Mounting) Figure 4...
MONITOR FRONT VIEW MONITOR REAR VIEW Monitor Operating Controls and Connections...
Page 15
MICROPHONE MIRROR/ "NORMAL" SWITCH Camera Features...
Page 16
INDICATOR 3 FT. 6 FT. WIDTH OF VEHICLE 9 FT. MARKER’S EXAMPLE Figure 8...
Page 17
SPECIFICATIONS: AOS58 Rated Voltage System, Operating Voltage Current Consumption Camera AOC75 Sensitivity Camera Signal System Image sensor Viewing Angle (approx.) Outer Dimensions Weight DISCLAIMER: The use of the VOYAGER observation does not guarantee or promise that the user will not be in an accident or otherwise not collide with an object.
Page 19
Optional Product List: AVT-988 9” Color Television with Remote (12V) AVT-1498 13” Color Television with Remote (12V) AVP-7000 Video Cassette Player (12V) AVP-7285 Video Cassette Player (12V) Single Disc DVD Player Headphones with Pivoting Earcups Headphones with Volume Control on Cord Studio Quality Headphones Remote Controls Wallmount Family Radio Service with 4 Handsets...
Need help?
Do you have a question about the AOC-75 and is the answer not in the manual?
Questions and answers