Advertisement
Quick Links
DMX Controller Channel Modes
DMX Channels(slider)
Value
Channel 1
0 - 199
Use as Speed control **
200 - 249
250 - 255
Channel 2 - 8
0 - 31
32 - 127
Hint (Channels
139 - 146
2,3,4,5,6,7,8 means each
147 - 154
lighting lens)
155 - 162
163 - 170
171 - 178
179 - 186
187 - 194
195 - 202
203 - 210
211 - 218
219 - 226
227 - 234
235 - 242
243 - 250
251 - 255
Channel 9
0 - 255
Lex Lighting Safety Instructions
1. Please keep this User Manual for future reference and be sure to pass this manual on to
anyone using the fixture.
2. Always make sure that you are connecting to the proper voltage as stated on the decal or rear
panel of the fixture.
3. This product is intended for indoor use only! To prevent risk of fire or shock, do not expose
fixture to rain or moisture.
4. Make sure there are no flammable materials close to the unit while operating.
5. The unit must be installed in a location with adequate ventilation, atleast 20inches (50 cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
6. Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse rating.
7. Secure fixture to fastening device using a safety chain.
8. Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures
higher than this.
9. In the event of a serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction and will void your warranty. Please contact the nearest authorized technical
assistance center.
10. Never connect the device to a dimmer pack.
11. Make sure the power cord is never crimped or damaged.
12. Never disconnect the power cord by pulling or tugging on the cord.
13. Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
14. Avoid direct eye exposure to the light source while it is on.
Function
Speed (Quick - Slow)
Auto Run Mode
Sound Active Mode
All LED's Off
Various Auto Patterns **
Red LED
Green LED
Red & Green LED
Blue LED
Blue & Red LED
Green & Blue LED
Blue, Red & Green LED
White LED
Red & White LED
Green & White LED
Red, Green & White LED
Blue & White LED
Red, White & Blue LED
Green, Blue & White LED
All LED's On
All LED's (as above ch 2-8)
Advertisement
Summary of Contents for LEX Lighting Lex 7 Star
- Page 1 Channel 9 0 - 255 All LED’s (as above ch 2-8) Lex Lighting Safety Instructions 1. Please keep this User Manual for future reference and be sure to pass this manual on to anyone using the fixture. 2. Always make sure that you are connecting to the proper voltage as stated on the decal or rear panel of the fixture.
- Page 2 Auto Play Mode Congratulations on purchasing your new lighting effect Auto Play mode is where the light will go through its inbuilt programs from Lexlighting. Reading through this manual will ensure one by one, regardless of any sound input. There are various pat- trouble free and long life operation of the unit.
- Page 3 DMX Mode Master/Slave Modes DMX (Digital Multiplex) is a universal protocol used as a form The Lex7Star can be linked together with other Lex7Star units to of communication between intelligent fixtures and controllers. A create a stunning, in-sync lightshow. This is acheived by linking the DMX controller sends DMX data instructions from the controller units together via the 3 pin DMX connections at the rear.