Conair CS710C INFINITI PRO Instruction & Styling Manual

GET TO KNOW YOUR
STRAIGHTENING IRON
New extra long plates for
faster, better results
Floating
plate
Nano
tourmaline
ceramic plates
30 heat
settings
Auto off
Ultra-slim
design
Instant Heat
technology
Uniform heat
recovery system
Ceramic heater
USER
MAINTENANCE
Your straightening iron is virtually maintenance-
free. No lubrication is needed. Keep all vents
and openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, allow to cool and wipe
exterior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an Authorized Service
Centre only. No repairs should be attempted by
the consumer.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into the
appliance, causing it to rupture and short circuit.
Inspect the cord frequently for damage. Stop use
immediately if damage is visible or if unit stops
or operates intermittently.

STORAGE

When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug
connections. Do not wrap the line cord
around the appliance. Allow the cord to hang
or lie loose and straight at the point of entry
into the appliance.