Folder - Video Settings; Normal Recording; Motion Detection; Set Auto Recording Start Time - Motao CV021 User Manual

Video Setting
VIDEO MODES:
Normal REC
Camera will start recording video once the " " button is pressed. A small red circle start to
flash on the screen indicating recording. Also half of the red LED light bar will steady flash.
When you are finished, press " " button again to stop video record and the video clip will
automatically be saved. Pressing the " " button again will start a new video clip.
Motion Detect
Camera will start recording video only when motion activates a detector. When the lens
detects movement, it begins to record and the camera will not stop recording video until all
movement has ceased.
The movement detector will require 10 seconds shut down to reset before it can start
movement detection again at each additional restart. The default video record time is 1 minute
if the movement was less than 30 seconds. The camera will not stop recording video if
movement is constant the camera will record until battery runs out or memory is full and no
longer has space.
Time REC
Sets a time to start recording video automatically. For
this feature you must first set your time Rec settings by
pressing " " to next Video Setting screen, then press
Scroll button to Time Rec and press " " .
The Time Rec Settings menu will have 5 lines of
numbers with default numbers or unset in white.
A graphic explaining these numbers and what they
mean is to the right. Entering dates past or values
beyond a maximum set limit will invalidate the setting.
To make a time setting use the Scroll buttons to add / subtract the number. Press " " button
to set the option desired. After an option is set, Press " " to move to next option or to move
down to next line.
Press button enter the main menu.
Press " " or " "buttons to scroll the Video Setting folder.
Press " " button to enter.
Page 11