Bissell Steam Mop 1005-E SERIES User Manual page 5

A
ssembly
Your Steam Mop assembles quickly and
easily. The only thing you will need for
assembly is a Phillips head screwdriver.
Your Steam Mop is packaged with the
following items:
Handle Assembly
lower Body with Water Filter
Manoeuvrable swivel Head
Removable Water Tank
1 large Phillips Head screw
taped to the handle
1 small Phillips Head screw
taped to the handle
2 Microfibre Mop Pads
1. Attach lower body to manoeuvrable
swivel head.
2.
Secure manoeuvrable swivel head
with small Phillips head screw. Tighten
until secure.
3. Slide handle assembly down into
lower body until it will go no further.
4. Secure the handle by placing the
large Phillips head screw through the
screw opening in the lower body and
into the rear of the handle assembly.
Tighten with screwdriver until secure.
5. Slide water tank onto lower body by
lining up vertical glides and gently
sliding tank into place.
Steam Mop assembly is now complete.
w w w . b i s s e l l . c o m
Handle Assembly
Lower Body
Manoeuvrable Swivel Head
Removable
Water Tank
2
1
3 4
5
Large Screw
Small Screw
2 Microfibre Mop Pads
5