Syncactive SYNC GPS User Manual

SYNC GPS
TM

USER GUIDE

/INSTRUCTION MANUAL
WWW.SYNCACTIVE.COM
Sportline® and SYNC™ are trademarks of SPORTLINE,
a division of EB Sport Group, Hazleton, PA 18202
The Bluetooth® mark and logos are owned by Bluetooth SIG, Inc.
MapMyRun™ is a registered trademark of MapMyFitness, Inc.
All Rights Reserved. ©2013
Distributed in the UK by
EB Brands (UK), Worcester, WR4 9FA
SP3010IS01SYN
SETUP | SYSTEM SETTINGS
SYSTEM SETTINGS
seconds
minutes
hours
year
month
2
day
ADJUST
SETTING
12/24hr
VALUE
key tone
1 3
gender
HOLD FOR
3 SECONDS TO
birthday year
ENTER SETUP
unit of measure
ACCEPT ENTRY
weight
& GO TO THE
NEXT SETTING
height
HOLD FOR 3 SECONDS
stride length
TO EXIT SETUP
contrast
PROGRAMMING THE WATCH:
1. PRESS & HOLD the MODE button for 3 seconds to enter the settings mode.
2. PRESS the START/STOP or LAP buttons (increase/decrease) to adjust the value of
the flashing setting.
3. Press MODE to confirm the value and move to the next setting.
4. You will automatically exit settings when all values are confirmed or PRESS &
HOLD the MODE button to exit early.
SYNC™ GPS harnesses the power of your smartphone and transmits the
data to the watch. Sophisticated GPS tracking, satellite-based speed and
distance, and a running tab on your calorie burn are now all at a quick
glance when you are in motion.
(Please visit www.syncactive.com/compatibility for a complete list of compatible devices.)
Downloading the MapMyRun™ Application:
If not already a MapMyRun™ user, you will need to download the FREE
application and register as a new user.
If you are an existing MapMyRun™ user, please ensure you have
downloaded the most recent version of the MapMyRun™ software by
checking your application updates.
For a complete tutorial regarding downloading, installing, and using the
MapMyRun™ application, please visit: www.syncactive.com/tutorial
ACTIVATING WATCH:
To save power during shipping, your watch has been deactivated.
PRESS & HOLD any button for 3 seconds to activate.
PAIRING YOUR WATCH
3
Downloading the MapMyRun™ Application:
If not already a MapMyRun™ user, you will need to download the FREE
application and register as a new user.
If you are an existing MapMyRun™ user, please ensure you have
downloaded the most recent version of the MapMyRun™ software by
checking your application updates.
! IMPORTANT: Due to continuous application enhancements, the included
instructions may be outdated. For the latest instructions, please visit:
www.syncactive.com/tutorial
(FIG.1) = BLUETOOTH ON
1. Within the main settings of your
smartphone, ensure that Bluetooth is
(FIG.2)
turned ON and that the Bluetooth
symbol is displayed at the top of
your smartphone screen (Fig.1).
Note: You will not see the SYNC™
GPS watch as a connection option in
the main Bluetooth settings, those
connections will be made inside the
MapMyRun™ application.
2. Open the MapMyRun™ application and
from the settings menu, select Heart Rate
& Other Sensors > SYNC GPS Watch.
3. From the Time screen of the watch, PRESS
the top right button (ST/STP) and the watch will
enter PAIRING mode (Fig.2).
4. On the application, tap the PAIR button and the application will begin
pairing with the device. It can take up to 15 seconds to pair. Sometimes it
may take 1 or 2 tries before pairing is successful.
SP3010IS01SYN
16" X 11"
8/13/13 Niko
OVERVIEW
LIGHT
MODE
•CHANGE MODES
•HOLD TO ENTER
SETTINGS
CONNECTED TO PHONE
MANUAL WORKOUT
TIMER ACTIVATED
REPEAT TIMER
LOW BATTERY
The SYNC™ GPS is designed to link with your smartphone and receive all of
the same fitness metrics that are being recorded and displayed by
MapMyRun™, including GPS accurate speed and distance.
4
5. The watch will display a "PAIRED" message once successfully paired,
and the Bluetooth icon on the watch screen and smartphone will remain
lit.
6. Once paired successfully, you may exit the settings screens back to the
homepage and begin using the MapMyRun™ application to actively record
your workouts.
For troubleshooting, please visit:
www.syncactive.com/tutorial
Notes:
To unpair your watch from your phone. From the Time screen on the
watch, enter Pairing mode by PRESSING the ST/STP button. Then PRESS
IN THE TIME SCREEN:
PRESS TO PAIR
& HOLD the ST/STP button.
PRESS, THEN PRESS
& HOLD TO UNPAIR
MODES OF OPERATION
1
START/STOP/RESET
•PAIRS WATCH TO PHONE
•STARTS & STOPS
TIMER, STOPWATCH
& WORKOUTS
•RESETS WORKOUT
(PRESS & HOLD)
TIME DISTANCE
LAP
•RECORDS A LAP
•CHANGES BOTTOM LINE
OF DATA IN WORKOUT SCREENS
•CHANGES TOP LINE OF DATA
IN WORKOUT SCREENS
[PRESS & HOLD]
ALARM
ALARM ON
PRESS MODE BUTTON (LOWER LEFT BUTTON)
The SYNC™ GPS main modes of operation can be accessed by PRESSING the MODE
button.
TIME – Displays the day, time, date
DISTANCE– Shows distance covered during workout in main viewing area
PACE – Shows pace in main viewing area
CALORIES– Shows calories burned during workout in main viewing area
CHRONO– Stopwatch function
INTERVAL (Timer) – Series of programmable timers that allow you to enhance your
running routine
ALARM – Daily alarm
5 USING MAPMYRUN™ AFTER PAIRING
! IMPORTANT: Due to continuous application enhancements, the included
instructions may be outdated. For the latest instructions, please visit:
www.syncactive.com/tutorial
After successfully pairing the watch, it should
automatically be detected by the application in
the future once the pairing button is pressed
on the watch.
1. Always ensure that Bluetooth is on in
the main phone settings and then open
the MapMyRun™ application.
2. On the watch, PRESS the top right
button (ST/STP) and the watch will enter
PAIRING mode (Fig.1) and then connect to the
phone.
3. From the main homepage of MapMyRun™
tap RECORD > START. The application will
begin recording your workout and the same
fitness data will be transmitted to your watch which you can view in the Workout
MODE screens. The Bluetooth icon on the watch should remain lit at all times to
indicate the watch is connected.
Note: If the watch does not seem to be paired and receiving data, go to the
MapMyRun™ Settings and select Heart Rate & Other Sensors > SYNC GPS
Watch and ensure that Sync™ GPS indicates "PAIRED" status. If it does not, you
will need to pair it again.
5. When you have completed your workout, press the stop button on the
application and all your data will be saved to MapMyRun™ . The data will not be
saved to the watch.
6. To unpair the watch from the phone go to the Time screen, PRESS the
ST/STP button to enter Pairing mode, then PRESS & HOLD the ST/STP button
again.
2
PACE CALORIE
TIMER CHRONO
6
CONNECTED
TO PHONE
IN THE TIME
SCREEN:
PRESS TO PAIR
PRESS, THEN
PRESS & HOLD TO
UNPAIR
(FIG.1) PAIRING WATCH TO PHONE