V.I.O POV.1 User Manual page 18

•
•
•
18 POV.1 Recorder
•
•
•
The Input/Output Port cover is located on the bottom of the POV.1
The Input/Output Port cover is attached to the bottom of the POV.1 with a
retaining screw. When the unit is shipped this screw will be loose so that the
Input/Output Port cover will be easier to remove.
Note that when the retaining screw is fully unscrewed it will be loose, but
will not come completely out of its socket.
In order to keep the POV.1 water-resistant the Input/Output Port cover fits
very tightly and you may need to use a small coin to pry it open. Be careful
to pry the cover open gently so as not to damage the cover or its water-
resistant seal.