Download Print this page
Casablanca W-18 Operation Manual

Casablanca W-18 Operation Manual

Ceiling fan/light control

Advertisement

Quick Links

3-SPEED © OPTIONAL WALL CONTROL © W-28 / W-18
W-28 CEILING FAN/LIGHT CONTROL
W-28
OPERATION
1. Raise the fan slider to increase fan speed, lower
to decrease.
2. For the fan, three speeds are available: Low 1,
Low 2, Medium, and High.The bottom position is
OFF.
3. The light slider is a dimmer, the bottom is OFF,
raise to increase intensity of the light.
4. The toggle switch is a separate preset control—
turns both the fan and light off or on to the
current setting.
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty
operation of the fan and damage to the wall control. To confirm fan is set to
HIGH: Turn W-80 fan speed switch to 'HI' - set fastest fan speed with pull chain.
Casablanca Fan Co. • Factory Service Department • Technical Library
W-28
Attractive dual slide optional fan and light
control.
W-18
Noise-free circuitry and quiet operation
Four optional fan speed settings
Continuously variable light dimming (300
watt max)
120VAC, 50/60Hz, 1.5Amp rating
Requires special wiring (a third wire)
Will operate one fan only
Available in Snow White and Ivory
finishes
W-28

Advertisement

loading

Summary of Contents for Casablanca W-18

  • Page 1 3-SPEED © OPTIONAL WALL CONTROL © W-28 / W-18 W-28 CEILING FAN/LIGHT CONTROL W-28 Attractive dual slide optional fan and light control. Noise-free circuitry and quiet operation Four optional fan speed settings Continuously variable light dimming (300 watt max) W-18 120VAC, 50/60Hz, 1.5Amp rating...
  • Page 2 W-28 wall control. To confirm fan is set to HIGH: Turn W-28 fan speed switch to ‘HI’ - set fastest fan speed with pull chain. Casablanca Fan Co. • Factory Service Department • Technical Library...
  • Page 3 W-28 wall control. To confirm fan is set to HIGH: Turn W-28 fan speed switch to ‘HI’ - set fastest fan speed with pull chain. Casablanca Fan Co. • Factory Service Department • Technical Library...
  • Page 4 2. Remove the screws holding the switch in the switch box. 3. Pull the existing switch from the switch box to expose the wire connections. 4. Remove the two wires from the switch. Casablanca Fan Co. • Factory Service Department • Technical Library...

This manual is also suitable for:

W-28