Cookworks Signature 4227975 Instruction Manual

Cookworks Signature 4227975 Instruction Manual

Advertisement

Quick Links

FOOD PROCESSOR
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4227975 and is the answer not in the manual?

Questions and answers

Summary of Contents for Cookworks Signature 4227975

  • Page 1 FOOD PROCESSOR INSTRUCTION MANUAL...
  • Page 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions carefully, even if you are familiar with appliance. To protect against the risk of electric shock DO NOT IMMERSE the appliance, cord set or the plug in water or any other liquid.
  • Page 3 KNOW YOUR APPLIANCE MAIN UNIT 1. Food Pusher 2. Bowl Lid 3. Slice / Shred Disc 4. Disc Stem 5. Bowl (2.4L Max.) 6. Center Post 7. Control Panel 8. Base 9. Chopping Blade CONTROL PANEL 1. Off / Pulse Switch 2.
  • Page 4 SAFETY LOCK SYSTEM This appliance is equipped with a safety lock system which will prevent the motor starting without proper installation of the bowl and it’s lid. To activate the system, you have to carry out the following: Put the plastic bowl onto the base. Turn the bowl until the alignment marks on the base of the bowl and on the base are in line.
  • Page 5 For using on chopping blade, 1. Put the bowl to the base. Turn the bowl until the alignment marks on the base of the bowl and on the base are in line. 2. Place the chopping blade (9) onto the centre post (6) as fig.3. 3.
  • Page 6 The appliance should not be stored while hot or plugged in. When not in use, allow the appliance to cool, then put it back into the box and store out of reach of children in safe, dry place. CONNECTION TO POWER Before connecting, check that the voltage indicated on the appliance (bottom of the appliance) corresponds with the main voltage in your home.
  • Page 7 If a 13 Amp (BS1363) fused plug is used it must be fitted with a 13A fuse conforming to BS1362 and be ASTA approved. If in doubt contact a qualified electrician DISPOSAL INFORMATION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Table of Contents