Thermostat Name; Available Modes; Sd Card (Import And Export); General Setup - Venstar COMMERCIAL T6800 ColorTouch Owner's Manual And Installation Instructions

Main Menu Buttons -
Settings

Thermostat Name

Use keypad to name
your thermostat. The
name is displayed on
the Home Screen.
(Up to 14 characters)
Name appears here

Available Modes

Choose the desired modes the thermostat will use: Heat, Cool, Heat & Cool,
or Auto (All). For example, if you only have a heater, choose Heat, and only
Heat & Off modes will be available. This will simplify the operation for the user.
SD Card
Import and export files to and from the thermostat. See the
ColorTouch Assistant instructions for further details.
Import Settings from SD Card
Upload files from ColorTouch Assistant or
another thermostat.
Export Settings to SD Card
Export files from one thermostat and import
them into others.

General Setup

Units
Fahrenheit (F)
Celsius (C)
Settings
Thermostat heating and
cooling options are found
in this menu
(F)
34
(all)
*NOTE: A 2GB SD card is
recommended. To import
and export files, the SD card
must contain the same version
of the firmware as the thermostat.
ColorTouch Assistant will keep
the firmware current.